Samsung TX-T2781, TX-T2782, TX-T2082 manual Using Pseudo Stereo, Using Turbo Plus

“Pseudo Stereo” converts a mono sound signal into two identical left and right channels. Once the “Pseudo Stereo” is set to “On” or “Off”, the setting is applied to sound effects such as “Standard”, “Music”, “Movie”, and “Speech”.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Sound, then press the ENTER button.

2Press the ▲ or ▼ button to select Pseudo Stereo, then press the ENTER button.

3 Press the ▲ or ▼ button to select On or Off, then press the ENTER button. Press the EXIT button to exit.

Using Turbo Plus

“Turbo Plus” emphasizes the bass and treble frequencies to add fullness to the sound.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Sound, then press the ENTER button.

2Press the ▲ or ▼ button to select Turbo Plus, then press the ENTER button.

3 Press the ▲ or ▼ button to select On or Off, then press the ENTER button. Press the EXIT button to exit.

Press the TURBO button on the remote control repeatedly to select On or Off.

Clearing Scrambled Channels - Digital

The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.

It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ▲ or ▼ button to select Clear Scrambled Channel, then press the ENTER button. It searches scrambled channels, which are to be removed from the list.

To stop searching scrambled channels;

Press the ▼ button to select Stop, then press the ENTER button. Press the ◄ button to select Yes, then press the ENTER button.

3When the scrambled channel searching is completed, press the ENTER button. Press the EXIT button to exit.

Adding and Erasing Channels - Analog

Clear Scrambled Channel

Removing Scrambled Channel.

You can add or delete a channel to display the channels you want.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ▲ or ▼ button to select Add/Delete, then press the ENTER button.

3Press the ▲ or ▼ button to select the desired channel, then press the ENTER button.

4 Press the ▲ or ▼ button to select Deleted or Added, then press the ENTER button. Press the EXIT button to exit.

Press the ADD/DEL button on the remote control. Press the CH and CH button to select the channel to be added or deleted, then press the ENTER button.