Samsung DVD-V77MS Using the Assemble Edit Function, Recording from Another VCR or Camcorder

00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 40

VCR Connecting an RCA Audio/Video Input Cable

Using the Assemble Edit Function VCR

GB
	SELECT				You can connect other audio/video equipment to your DVD-VCR
					using audio/video cables if the appropriate outputs are available on
					the equipment chosen.
REC	VIDEO		L AUDIO R		Examples: ◆ You wish to copy a video cassette with the help of a
						second VCR (see page 41).
		1	2			◆ You wish to play back and/or copy pictures taken
						with a camcorder (see page 41).
					☛	◆ Make sure that both the television and the DVD-VCR
						are switched off before connecting the cables.
REC	VIDEO		L AUDIO R		1	Connect one end of the RCA audio/video cable into the VIDEO
						socket on the Front of the DVD-VCR.
	3	LINE IN 2		3	2	Plug the other end of the audio/video cable into the appropriate
						output connector on the other system (VCR or camcorder).
					3	Connect one end of the RCA audio cable into the AUDIO sockets
						on the Front of the DVD-VCR.
						➢ Take care to respect the colour coding of the left and right
						channels.
					4	Plug the other end of the audio cable into the appropriate output
						connectors on the other system (VCR, camcorder or Hi-Fi sound
						system).

This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.

1Insert the cassette to be edited in your DVD-VCR.

2Press the ❿ll button to start playback.

3When you reach the position from which you wish to start the new recording, press the ❿ll button.

4Turn the JOG Dial again as often as necessary to advance frame by frame, until the exact recording position is located.

5While the DVD-VCR is in still mode, hold the REC button ( ●) down for a while to activate the Assemble Edit function.

Result: Record symbol flashes in the display.

6Select the source from which you wish to record by pressing:

◆The PROG/TRK ($ or ❷) buttons for television channels

◆The INPUT SEL. button for the LINE input sources

7Press the ❿ll button to start recording.

8When you have finished recording, press ■ .

GB

2

5

4

Recording from Another VCR or Camcorder VCR

You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the DVD-VCR, from which the cassette is to be copied, to the appropriate RCA audio and video input connectors on the rear of your DVD-VCR, as indicated on page 11.

2Insert a blank cassette in your DVD-VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT SEL. button to select the appropriate input on your DVD-VCR: LINE IN for the RCA input

5Start playing back the cassette to be copied.

6Hold REC (●) down for a while to start recording on your DVD-VCR.

7When you have finished recording, press ■ on both VCR and DVD-VCR.

➢If you wish to view the cassette being copied:

◆Your DVD-VCR must be connected as usual to the television (see page 11 for further details)

2

7

6

40 41