Samsung DVD-V77MS VCR Selecting the Colour Mode Intelligent Picture Control, Please refer to

00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 24

VCR Selecting the Colour Mode

Intelligent Picture Control VCR

GB

Australia Model

			USER SET
	COLOUR SYSTEM		:AUTO
	IPC		:ON
	AUTO POWER OFF		:OFF
	G-CODE EXTEND		:OFF
	RETURN	"❷!!➛!❿
Newzealand Model
			USER SET
	COLOUR SYSTEM		:AUTO
	NICAM		:ON
	IPC		:ON
	AUTO POWER OFF		:OFF
	G-CODE EXTEND		:OFF
	RETURN	"❷!!➛!❿

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢◆ When playing back a cassette, the standard is automatically selected by the DVD-VCR.

◆When you playback an NTSC-recorded tape on this DVD- VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB.

If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1Press SETUP on the remote control. Result: The MAIN MENU is displayed.

2Press the corresponding ",❷ buttons to select the Option.

3Press the ENTER button to select this option. Result: The USER SET menu is displayed.

4Press the corresponding "or ❷ buttons, until the COLOUR SYSTEM option is selected.

5	Press the ❿ button to select AUTO ➝ PAL ➝ MESECAM ➝ B/W.
	AUTO	When playing back a cassette, the system standard is
		automatically selected by the DVD-VCR.
	B/W	Black and White

6On completion, press RETURN to exit the menu.

The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences.

1During playback, press the SETUP button on the remote control. Result: The MAIN MENU is displayed.

2Press the corresponding ", ❷!buttons to select the Option.

3Press the ENTER button to select this option. Result: The USER SET menu is displayed.

4Press the corresponding "or ❷ buttons, until the IPC option is selected.

5Press the ❿!button to select the IPC (intelligent picture control) option.

➢When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically.

6To adjust the sharpness manually, press the ❷ button to turn the IPC mode OFF.

7Press the ➛ or ❿ buttons until the picture is displayed according to your preferences.

➢If you do not press a button within ten seconds, the PICTURE menu disappears automatically.

8On completion, press the RETURN button again.

GB

Enter

Return

DVD Setup

VCR Setup

Language

Parental

Option

Program

Australia Model

		USER SET
	COLOUR SYSTEM	:AUTO
	IPC	:ON
	AUTO POWER OFF :OFF
	G-CODE EXTEND	:OFF
	RETURN	"❷!!➛!❿
Newzealand Model
		USER SET

VCR NICAM (Newzealand Model only)

COLOUR SYSTEM	:AUTO
NICAM	:ON
IPC	:ON
AUTO POWER OFF	:OFF

Enter

Return

DVD Setup

VCR Setup

Language

Parental

Option

Program

	USER SET
COLOUR SYSTEM	:AUTO
NICAM	:ON
IPC	:ON
AUTO POWER OFF :OFF
G-CODE EXTEND	:OFF
RETURN	"❷!!➛!❿

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.

Please refer to page 36.

1Press SETUP on the remote control. Result: The MAIN MENU is displayed.

2Press the corresponding ",❷ buttons to select the Option.

3Press the ENTER button to select this option. Result: The USER SET menu is displayed.

4Press the corresponding " or ❷ buttons, until the NICAM option is selected.

5	To...	Press ➛ or ❿, until...
	Mono mode	OFF is displayed.
		OFF: Only set at this position to record the
		standard mono sound during a
		NICAM broadcast if the stereo sound
		is distorted due to inferior reception
		conditions.
	NICAM mode	ON is displayed.
		ON: Normally set at this position.

6On completion, press RETURN to exit the menu.

G-CODE EXTEND :OFF

RETURN"❷!!➛!❿

24 25