Samsung DVD-R119 instruction manual Plug & Auto Setup

Plug & Auto Setup

Your DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD RECORDER will then be ready for use.

1	Connect the RF cable as indicated on page 17.
	(Connecting Your DVD RECORDER to the TV
	Using the RF Cable and scart cable.)
2	Plug the DVD RECORDER into the mains.
	“Auto” in the front panel display flickers.

System Setup

3 Start the auto setup.

Auto setup will be started.

Check antenna and TV cable connection.

OK Cancel

4 Press OK button. Auto Channel scan will be started.

Channel Scan

Now, Scanning...

10%

•The number of stations automatically stored by the DVD RECORDER depends on the number of stations that it has found.

5	After Auto Channel Scan is completed, Auto Clock
	Setting will be started automatically in 10 seconds.

If you want to start Auto Clock Setting immediately, press OK button. If you do not want to do Auto Clock Setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press the [OK] button to auto clock set.

Yes No

6 Wait until current date and time are displayed automatically. If you want to exit Auto Clock Setting, press MENU button.

Please wait. Now setting the clock.

If you want to exit clock setting,

press the [MENU] button.

7 Check the date and time.

Clock Set

No Disc

Time	Date	Auto Clock
07 : 49	01 / JAN SAT 2005	On

MOVE SELECT RETURN EXIT

•if it is : Correct, press OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds.

•if it is : Incorrect, input correct Time, Date, Year

using …†œ √ buttons or number buttons. Press OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually. (see page 25)

24 - English