¦¦ Switching between Anynet+ Devices
1.Press the TOOLS button. Press the Ebutton to select Anynet+
2.Press the ▲ or ▼ button to select Device List, then press the Ebutton.
NN Anynet+ devices connected to the TV are listed.
NN If you cannot find a device you want, press the red button to scan for devices.
3.Press the ▲ or ▼ button to select a particular device and press the Ebutton. It is switched to the selected device.
NN Only when you set Anynet+
Device List
View TV |
|
|
Device List |
|
|
Record | : | DVDR |
DVDR Menu |
|
|
DVDR Operation |
|
|
Setup |
|
|
|
|
|
| U Move | E Enter R Return |
NN Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
NN The time required to scan for devices is determined by the number of connected devices. NN When the device scan is complete, the number of devices found are not displayed.
NN Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the connected device.
NN If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu | Description | |
View TV | Anynet+ mode changes to TV broadcast mode. | |
Device List | Shows the Anynet+ device list. | |
(device_name) Menu | Shows the connected device menus. E.g. If a DVD recorder is | |
connected, the disc menu of the DVD recorder will appear. | ||
| ||
(device_name) | Shows the play menu of the connected device. E.g. If a DVD recorder | |
Operation | is connected, the play menu of the DVD recorder will appear. | |
Record: (*recorder) | Starts recording immediately using the recorder. (This is only available | |
| for devices that support the recording function.) | |
Stop Recording: | Stops recording. | |
(*recorder) | ||
| ||
Receiver | Sound is played through the receiver. |
NN If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).