Samsung 933HD Plus user manual Appendix, TV Monitor Self-Diagnosis, Troubleshooting

Page 36

Appendix

¦¦ TV Monitor Self-Diagnosis

NN You can check if the product is working properly using the Self-Diagnosis function.

NN If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the selfdiagnosis function according to the procedures below.

1.Turn the product and the PC off.

2.Remove the D-Sub cable from the product.

3.Turn the product on.

4.If the product is working properly, the <Check Signal Cable> message appears.

In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection.

¦¦ Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG.

Problem

Possible Solution

Poor picture.

Try another channel. / Adjust the antenna. / Check all wire

 

connections.

Poor sound quality.

Try another channel. / Adjust the antenna.

No picture or sound.

Try another channel. / Press the SOURCE button.

 

Make sure the TV is plugged in. / Check the antenna

 

connections.

No sound or sound is too low at

First, check the volume of units connected to your TV

maximum volume.

(digital broadcasting receiver, DVD, cable broadcasting

 

receiver, VCR, etc.). Then, adjust the TV volume

 

accordingly.

The TV operates erratically.

Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on.

Make sure the wall outlet is working.

 

 

Remote control malfunctions.

Replace the remote control batteries.

 

Clean the upper edge of the remote control (transmission

 

window).

 

Check the battery terminals.

‘Check signal cable’ message.

Ensure that the signal cable is firmly connected to the PC

 

and DVI source.

‘Not Supported Mode’ message.

Check the maximum resolution and connected device’s

 

Video frequency.

 

Compare these values with the data in the Display Modes.

Digital broadcasting screen

Please check the digital signal strength and input antenna.

problem.

 

The image is too light or too dark.

Adjust the Brightness and Contrast. / Adjust the Fine

 

tuning.

English - 34

Page 35 Page 37
Image 36
Page 35 Page 37
Contents LCD TV Monitor Precautions When Displaying a Still Image Difference of light emission on the screenContents Accessories General InformationViewing the Control Panel EnglishConnector for service only Connects the supplied power cordViewing the Connection Panel TV Rear PanelRemote Control Installing Batteries in the Remote ControlConnecting VHF and UHF Antennas ConnectionsAntennas with 300 Ω Flat Twin Leads Antennas with 75 Ω Round LeadsConnecting Cable TV Connecting to a Cable Box that Descrambles Some ChannelsCable without a Cable Box Hdmi Cable Not supplied Connecting a VCR TV Rear Panel VCR Rear Panel2Audio Cable Not supplied Video Cable Not supplied Connecting a Camcorder Using a Video CableUsing an Hdmi Cable HD CamcorderConnecting a PC Using the D-Sub CableUsing the Hdmi Cable Plug & Play Feature OperationTurning the TV On and Off Configuring the Channel Menu „„ All Channels „„ Added Channels„„ Favorite „„ ProgrammedChannel List Option Menu in Programmed Configuring the Picture Menu TV / AV / Hdmi Picture ControlMode Picture Options Reset → Reset Picture Mode / Cancel „„ Film Mode → Off / AutoNN HD High Definition 169 1080i/1080p 1920x1080, 720p „„ Digital NR → Off / Low / Medium / High / AutoUsing Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XPDisplay Modes „„ Timing modesPC, DVI-D and Hdmi inputSetting up the TV with your PC Auto AdjustmentReset Reset Picture Mode / Cancel Contrast / Brightness / SharpnessConfiguring the Sound Menu Sound ControlSetup Configuring the Setup MenuLanguage TimeGame Mode → Off / On „„ Timer 1 / Timer 2 / TimerChip „„ V-Chip Lock → Off / On Canadian French Downloadable U.S. Rating„„ Change PIN → Power on „„ Caption ModeDefault / CC1~CC4 / Text1~Text4 analog channels only Caption On-Screen Text MessagesConfiguring the Input Menu Input / SupportConfiguring the Support Menu Software Upgrade„„ Signal Strength digital channels only „„ Sound TestConnecting Anynet+ Devices Anynet+HD Connection Guide Contact SamsungSetting Up Anynet+ Setup„„ Anynet+ HDMI-CEC → Off / On Anynet+ related operations are deactivatedSwitching between Anynet+ Devices Anynet+ MenuTroubleshooting for Anynet+ Installing the Software Installing the Device DriverNatural Color MultiScreen Installation Requirements MultiScreenRemoving the Software Operating SystemTroubleshooting AppendixTV Monitor Self-Diagnosis Try connecting Component cables instead On your computer check Power, Signal CableProgram to change the display settings STB with a digital signalVideo signal? Computer or thegraphics card Windows XP Configure it by selecting ControlWindows ME/2000 Configure it by selecting Control How can I clean the outer caseInstalling the Stand Disconnecting the StandWall Mount Kit Specifications Vesa Using the Anti-Theft Kensington LockSecuring the Installation Space Specifications Power Saving FunctionContact Samsung Worldwide Country Customer Care Center Web SiteTel 01-55-5747-5100

933HD Plus specifications

The Samsung 933HD Plus stands out as an innovative offering tailored for users seeking a blend of performance and efficiency in their display technology. Launched as part of Samsung’s commitment to providing high-quality monitors, this model features a range of characteristics that cater to both professional and casual users.

One of the key features of the Samsung 933HD Plus is its robust 19-inch LCD screen, which delivers a crisp 1366 x 768 resolution. This level of clarity ensures that text and images appear sharp and detailed, making it an excellent choice for tasks such as graphic design, data analysis, and everyday browsing. The monitor also boasts a 16:9 aspect ratio, providing a wider viewing experience that is ideal for watching videos and engaging in immersive gaming sessions.

The Samsung 933HD Plus incorporates advanced display technologies, including the company's proprietary techniques for enhancing color accuracy and contrast. With a typical brightness of 250 cd/m² and a dynamic contrast ratio of 20,000:1, users can expect vibrant colors and deep blacks, crucial for multimedia consumption. The monitor supports a wide color gamut, ensuring that images are displayed with lifelike fidelity.

In terms of design, the Samsung 933HD Plus features a slim profile with a sleek, modern aesthetic that can seamlessly complement any workspace. Its lightweight design makes it easy to position while also enhancing portability. Moreover, the monitor includes tilt and height adjustable capabilities, allowing users to customize their viewing experience for comfort and ergonomics.

Connectivity is another strong suit of the Samsung 933HD Plus, offering a range of input options including VGA, DVI, and HDMI ports. This means users can easily connect a variety of devices, from computers to gaming consoles. Additionally, the monitor supports both analog and digital signals, providing flexibility depending on user preferences.

Energy efficiency is prioritized with the Samsung 933HD Plus, aligning with modern standards to reduce electricity consumption without compromising performance. The monitor has earned various environmental certifications, making it a responsible choice for eco-conscious consumers.

In conclusion, the Samsung 933HD Plus combines a variety of features, advanced technologies, and user-centric design elements to deliver an exceptional display experience. Whether for work or play, this monitor exemplifies Samsung's dedication to innovation and quality in the world of computing displays.
Top Page Image Contents