Audio Format: MPEG/Dolby Digital
When sound is emitted from both the main speaker and the audio receiver, a around echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
➣While viewing a Digital channel, this function can be selected.
➣The “Audio Format” appears according to the broadcasting signal.
Manufactured under license from Dolby Laboratories. Dolby and the
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.
−Audio Description : On/Off
−Volume : 0~100
➣“Volume” is active when “Audio Description” is set to “On”.
➣While viewing a Digital channel, this function can be selected.
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Select Speaker: External Speaker/TV Speaker
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣The 
+, 
– and MUTE buttons do not operate when the “Select Speaker” is set to “External Speaker”.
➣When “Select Speaker” is set to “External Speaker”, you can operate only “Sound Select” (in PIP mode) and “Sound Reset” in Sound menu.
|
| TV's Internal Speakers | Audio Out (Optical, L/R Out) to Sound System | ||||
| RF |
| AV, | Component, PC, HDMI | RF | AV, | Component, PC, HDMI |
TV Speaker | Speaker Output |
| Speaker Output | Speaker Output | Sound Output | Sound Output | Sound Output |
External Speaker | Mute |
| Mute | Mute | Sound Output | Sound Output | Sound Output |
Video No Signal | Mute |
| Mute | Mute | Mute | Mute | Mute |
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
−Main: Used to listen to the sound of the main picture.
−Sub: Used to listen to the sound of the sub picture.
Sound Reset: Reset All/Reset Sound Mode/Cancel You can restore the Sound settings to the factory defaults.
English - 34