Switching On and Off
The mains lead is attached to the rear of your set.
1.Plug the mains lead into an appropriate socket. N The standby indicator lights up on your set.
2.Press the Pbutton on your set.
N You also can press the POWERPbutton or the TV button on the remote control to turn the TV on. N The programme that you were watching last is reselected automatically.
3.Press the numeric button (0~9) or channel up / down (</ >) button on the remote control or >C/P.P<button on your set.
N When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4.To switch your set off, press the POWERPbutton again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.Press the POWERPbutton on the remote control.
N The screen is turned off and a red standby indicator appears on your set.
2.To switch your set back on, simply press the POWERP, numeric buttons (0~9), TV button or channel up / down (</ >) button again.
N Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
Viewing the Menus
1.With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application.
2.Press the ▲ or ▼ button to select one of the icons. Then press the ENTERE button to access the icon’s
3.Press the EXIT button to exit.
N The
Picture
Mode:Standard
Backlight: 7
Contrast: 95
Brightness : 45
Sharpness : 50
Colour: 50
Tint (G / R) | : G50 / R50 |
Detailed Settings
English -