Samsung BN68-01699A-00 What is Anynet+?, Connecting Anynet+ Devices, To connect to Home Theater

Page 32

What is Anynet+?

Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are connected.

Connecting Anynet+ Devices

The Anynet+ system supports AV devices supporting Anynet+ only.

Check if there is an Anynet+ mark on the AV device to be connected to the TV.

To directly connect to TV


TV	Anynet+ Device 1		Anynet+ Device 2		Anynet+ Device 3
	Anynet+ Device 1		Anynet+ Device 2		Anynet+ Device 3
	HDMI Cable	HDMI Cable		HDMI Cable
		HDMI Cable

Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

To connect to Home Theater

TV
Anynet+ Device 1	Anynet+ Device 2
HDMI Cable	HDMI Cable
	HDMI Cable
Home Theatre	Anynet+ Device 3
HDMI Cable	HDMI Cable
	HDMI Cable

1.Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

2.Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

➣Connect only one receiver.

➣You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.

➣Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

➣Anynet+ supports up to 8 AV devices in total.

English - 30

Image 32

Contents

Country Customer Care Centre Web Site Precautions When Displaying a Still Image Still image may cause permanent damage to the TV screenContents Installing the Stand Installing the Wall Mount KitList of Parts  Registration CardsViewing the Control Panel Multi channel digital audio Viewing the Connection PanelConnect to the video and audio output jack on your PC Connector for Service only Video or Video / R-AUDIO-LViewing the Remote Control Colour buttons Use these buttons in the Channel list, etcInstalling Batteries in the Remote Control Switching On and OffPlacing Your Television in Standby Mode Mains lead is attached to the rear of your setUsing the Tools Button With the power on, press the Menu buttonViewing the Menus Press the or button to select a menuPlug & Play Press the Enter button to select Area If you want to reset this featureStoring Channels Automatically Sound System BG/DK/I/M Channel modeColour System Auto/PAL/SECAM/NTSC4.43/NTSC3.58 Locking channels Adding / Locking ChannelsAdding channels Then Sorting the Stored ChannelsAssigning Channels Names Fine Tuning Channel Reception Easy Setting Changing the Picture StandardYou can set detailed picture settings Adjusting the Custom PictureConfiguring Detailed Settings on the Picture Resetting the Picture Settings to the Factory Defaults Size 169/Wide Zoom/Zoom/43/Just Scan Changing the Picture OptionsColour Tone Cool2/Cool1/Normal/Warm1/Warm2 Blue Only Mode Off/On Digital NR Off/Low/Medium/High/AutoDNIe Off/Demo/On Hdmi Black Level Normal/LowViewing the Picture In Picture PIP SourceSize PositionSound Features Mode Standard/Music/Movie/Speech/CustomEqualizer Balance/100Hz/300Hz/1kHz/3kHz/10kHz SRS TS XT Off/OnSelecting the Sound Mode Connecting Headphones Sold separatelyPress Setting and Displaying the Current TimeSetting the Sleep Timer Switching the Television On and Off Automatically Auto Power OffChoosing Your Language Press the Menu button to display the on-screen menuTV power on/off melody sound can be adjusted Melody / Entertainment / Energy SavingMelody Off/Low/Medium/High Melody does not play Selecting the Source Energy Saving Off/Low/Medium/High/AutoEditing the Input Source Names Edit NameSetting up Your PC Software Based on Windows XP Display ModesSub Input HDMI/DVI InputSetting up the TV with your PC Preset Press the Source button to select PC modeAuto Adjustment Image ResetTo connect to Home Theater What is Anynet+?Connecting Anynet+ Devices Setting Up Anynet+ Scanning and Switching between Anynet+ Devices Setup Select DeviceRecord Menu on DeviceYou can make a recording of a TV programme using a recorder RecordingListening through a Receiver Press The Tools button. Then Press the Enter buttonCheck Points before Requesting Service Symptom SolutionTeletext Feature English Using the Anti-Theft Kensington Lock depending on the model Locking direction FigureSecuring the TV to the Wall To avoid the TV from fallingDepending on the type of wall WallTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications This page is intentionally Left blank