Remote Control Buttons and Functions:
Connecting a USB Device for Media Play
Network Connection - Wireless
✎✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.
You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. To
TV Side Panel
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB1
Turns the TV on and off.
Turns the remote control light on and off. When on,
connect a USB device for Media Play, follow
(HDD) or USB2 port on the back of your TV. See the illustration below.
Press to switch between the sources
Press number buttons for direct access to channels.
Press to select additional digital channels broadcast
by the same station. For example, to select channel
54-3, press 54, press -, and then press 3.
Adjusts the volume.
the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)
Return to the previous channel.
Cuts off the sound temporarily.
Change channels.
✎✎ If your TV is attached to a cable or satellite box, you change the channel using the box’s remote.
these steps:
1.Turn on your TV.
2.Connect a USB device containing photo, music and/ or movie files to the USB1 (HDD) or USB2 jack on the side of the TV.
3.When the Application selection screen appears, press the EnterEbutton on your remote to select Media Play (USB).
MediaPlay
Videos
SUM A Change Device
USB Drive
D View Devices EEnter RReturn
Wireless IP sharer | TV Side Panel | |
(AP having DHCP Server) | ||
Samsung Wireless | ||
The LAN Port on | ||
the Wall | LAN Adapter | |
| or | |
LAN Cable | Samsung Wireless | |
LAN Adapter |
Samsung’s Wireless LAN adapter supports the IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, and IEEE 802.11N wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11N.
Most wireless network systems incorporate a security system that requires devices
Displays the channel list on the screen. 
View the Media Play.
Quickly selects frequently used functions.
Selects the 
values seen on the menu.
Return to the previous menu.
Displays the main
Displays Favorite Channel Lists on the screen. 
Press to display information on the TV screen.
Exits the menu.
Connecting to a Local Area Network
To enjoy watching streaming content from online providers such as You Tube and Blockbuster, you must follow the steps below to connect the TV to your network.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:
that access the network through an access point or AP (typically a wireless modem or router) to transmit an encrypted security code called an access key.
For regular connections, your TV is compatible with the following security protocols:
•Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
•Encryption Type: WEP, TKIP, AES
Configuring the Network Connection - Wireless
Colored buttons for use in the Channel List, Media Play menu, etc.
Use these buttons in the Media Play and Anynet+ modes.
S.MODE: Selects the sound mode.
SLEEP: Setting the Sleep Timer.
MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
The Modem Port on the Wall | External Modem | TV Rear Panel |
(ADSL / VDSL / Cable TV) |
| |
|
| |
| Modem Cable | LAN Cable |
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these steps:
(
: controls recording on Samsung recorders with the Anynet+ feature)
P.MODE: Selects picture mode.
P.SIZE: Choose the picture size.
CC: Controls the caption decoder.
The LAN Port on the Wall | TV Rear Panel |
|
1. | Connect your TV to your network as |
| shown in the illustrations above. |
2. | Turn on your TV, press the |
| MENU button on your remote, and |
| the select Setup → Network. |
3. | Set the Network Type to Wireless if |
Network Setup
Select a network | : Not Selected |
| ► | ||||||
Internet Protocol Setup | : Auto |
|
|
| |||||
IP Address | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Subnet Mask | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Gateway | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Selecting a Source
To watch a movie on your
Changing Channels and Adjusting the Volume
You can change the channel and
LAN Cable |
it is not already set to Wireless. |
4. Select Network Setup. The |
Network Setup screen appears. |
DNS | : Auto |
DNS Server | : |
| UMove EEnter RReturn |
your favorite TV show, you must select the correct
source. A source is a device, such as a
your TV through the HDMI, DVI, Component,
Composite, or
To view the signal from a source connected to the HDMI, DVI, Component, Composite, or
adjust the volume by using
the CH and VOL buttons on the
remote. You can also change | Remote control sensor | Power Indicator | ||||||
the channels by pressing the |
|
|
|
|
|
|
|
|
zbuttons on the front |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
panel of your TV and adjust the |
|
|
|
|
|
|
|
|
volume by pressing the y |
|
|
|
|
|
|
|
|
buttons. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Configuring the Network Connection - Wired
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.
To configure your network connection for a network that uses DHCP, follow these steps:
5. | On the Network Setup menu, select an AP(Access Point) and ad hoc network. |
| if you have selected network with a security key, the Security Key screen |
| appears. |
6. | Enter the Security Key using the numbers on the remote, and then press the |
| Blue button on your remote. |
| ✎✎ If your network uses WEP security encryption, 0~9 and A~F will be |
| available on the Security Key screen. Use the Direction button on your |
| remote to move to the characters and the enter key to select them. |
you press the Source button, you change to a different source.
Viewing the On Screen Menus
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the clock, follow these steps:
1. | Connect your TV to your network |
| as shown in one of the illustrations |
| above. |
2. | Turn on your TV, press the Menu |
| button on your remote, |
Network Setup
Internet Protocol Setup | : Auto |
|
|
|
| ► | |||
|
|
|
|
|
|
|
|
|
|
IP Address | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Subnet Mask | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7. | On the Network Setup menu, set Internet Protocol Setup and |
| DNS to Auto. The Auto acquires and enters the necessary internet values |
| automatically. |
8. | Select Network Test to check internet connectivity. |
To view the On Screen Menus, follow these steps:
1. With the power on, press the Menu button | Menu |
on your remote. The main menu appears. |
|
The menu’s left side has the following menu |
|
options: Picture, Sound, Channel, |
|
Setup, Input, Application, and Support. |
|
1. | Turn on your TV. |
2. | Using your remote, press the |
| Menu button on your remote. |
| Then, select Setup → Time. |
3. | Select Clock Mode, and then |
| press the EnterEbutton. |
Clock Set
Month | Day | Year |
Hour | Minute | am/pm |
| and then select Setup → Network. |
3. | Set the Network Type to Wired if it |
| is not already set to Wired. |
4. | Select Network Setup. The |
| Network Setup screen appears. |
Gateway | : |
DNS | : Auto |
DNS Server | : |
| UMove EEnter RReturn |
✎✎ For more information, see your user’s manual. |
2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the EnterEbutton.
3.When done using the menu, press the Exit button on your remote to exit.
Set Clock Mode to Manual. |
✎✎ Select Auto if you have a digital |
channel in your area and are not |
using a cable/sat box. |
LMove | UAdjust | EEnter RReturn |
5. | On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. |
| Auto acquires and enters the necessary internet values automatically. |
6. | Select Network Test to check Internet connectivity. |
| ✎✎ Some networks are Static IP networks. If your network is a Static IP |
4.Select Clock Set, and then press the EnterEbutton. The Clock Set screen appears.
5.Using the number buttons on your remote, enter the month, day, year, hour, and minute. Use the ◄ or ► button to move between entry fields.
6.Press the Return button on your remote when done.
network, you can not use DHCP to configure the network connection. |
Instead, you must enter the IP Address, Subnet Mask, Gateway, and |
DNS Server manually. For instructions explaining how to configure a |
Static IP network, see your user’s manual. |
English - 2