Setting up the TV with your PC

NPreset: Press the SOURCE button to select PC mode.

❑Auto Adjustment

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

NThis function does not work in DVI-HDMI mode.

TPress the TOOLS button to display “Tools” menu. You can also set the Auto Adjustment by selecting “Tools → Auto Adjustment”.

❑Screen

Picture

Brightness : 45

Sharpness : 50

Auto Adjustment

►

Screen

Detailed Settings

Picture Options

Picture Reset

Coarse / Fine: The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen.

PC Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset: You can replace all image settings with the factory default values.

Sound Control

Changing the Sound Standard

❑Mode → Standard / Music / Movie / Speech / Custom

You can select the type of special sound effect to be used when watching a given broadcast.

TPress the TOOLS button to display “Tools” menu. You can also configure the sound mode by selecting “Tools → Sound Mode”.

❑Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode: You can select a sound mode to suit your personal preferences.

Balance: Controls the balance between the right and left speakers.

100Hz / 300Hz / 1kHz / 2kHz / 3kHz / 10kHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies

Reset: Resets the equalizer settings to the default values.

❑SRS TruSurround XT → Off / On

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Sound

Mode	: Custom
Equalizer
SRS TruSurround XT : Off		►
Audio Language	: ----
Audio Format	: ----
Audio Description
Auto Volume	: Off
Select Speaker	: TV Speaker
Sound Select	: Main
Sound Reset
Select Speaker	: TV Speaker
Sound Select	: Main
Sound Reset		►

TPress the TOOLS button to display “Tools” menu. You can also set the SRS TruSurround XT by selecting “Tools → SRS TS XT”.

TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

English - 18