Samsung BN68-01700A-00 user manual Securing the TV to the Wall, To avoid the TV from falling

Page 62

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

Wall

Wall

To avoid the TV from falling:

1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

N You may need additional material such as an anchor depending on the type of wall.

N Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2.Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

N Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

N Screw Specifications

-For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15

3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.

N Install the TV near to the wall so that it does not fall backwards.

N It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. N Untie the string before moving the TV.

4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

English - 60

Image 62

Contents Serial No Contact Samsung WorldwideContact Samsung Worldwide Precautions When Displaying a Still ImageDigital TV DVB-T Notice Contents Power Cord Cover-Bottom Program CD Cleaning Cloth Connecting and Preparing Your TV List of PartsInstalling the Wall Mount Kit = + Viewing the Control PanelFront Panel buttons P.PPC in PC / Audio TV Rear Panel TV Side Panel @ Power InputViewing the Connection Panel Connect to the video and audio output jack on your PCConnect a LAN cable to this port to connect to the Network Supported modes for Hdmi / DVI and Component@ EXT 1, EXT $ Kensington Lock depending on the modelRemote Control Placing Your Television in Standby Mode Installing Batteries in the Remote ControlSwitching On and Off Viewing the Menus Using the Tools ButtonUsing the Wheel button ModeChannel Control Storing Channels and channel Plug & Play FeatureIf you want to reset this feature CountryManual Store Channel modeAuto Store Full Guide / Mini GuideSignal Information Default GuideChannel Mode Using the Full / Mini GuideChannel Status Display Icons Using the Colour buttons with the Channel ListManaging Channels All favourite channels will be shown on Favourite menuDetailed Settings Picture Control Changing and Resetting the Picture SettingsMode Standard Channel List Option Menu in ProgrammedDetailed Settings Customizing the Colour SpaceDNIe Digital Natural Image engine DNIe 1080p signals are inputPicture Options PIP → On / Off Picture Reset → Reset Picture Mode / CancelViewing Picture-in-Picture Main picture Sub picturePC Display Setting Up Your PC Software Based on Windows XPMode Resolution Horizontal Display ModesSetting up the TV with your PC Sound Control Changing the Sound StandardAudio Language Auto Volume → Off / OnSound Reset Audio Format → Mpeg / Dolby DigitalSelecting the Sound Mode Function Description Configuring the Setup MenuTeletext Language Digital Text → Disable / Enable UK onlySubtitle PreferenceCommon Interface Software UpgradeEnergy Saving Timer 1 / Timer 2 / Timer Setting the TimeSleep Timer → Off / 30 / 60 / 90 / 120 / 150 Auto Power OffNetwork Connection Network Connection CableNetwork Connection Wireless  LAN Connection for Static IP EnvironmentWireless Network Setup Network SetupCable Network Setup Cable Network Setup-Auto SetupSource List / Edit Name Product Guide Wiselink Pro Connecting a USB DeviceUsing the Remote Control Button in Product Guide Menu Button OperationsRemoving a USB Memory Device Safely Using the Wiselink Pro FunctionEntering the Wiselink Pro Menu ∂/∑ Using the Remote Control Button in Wiselink Pro MenuScreen Display Sorting Standard for the Photo List Using and Sorting Photo ListChanging the Favourites setting Photo List Option MenuPlaying current group Viewing a Photo or Slide ShowViewing a Slide Show To perform a SlideShow with only the selected filesSlide Show Option Menu  Rotate You can rotate photos saved on a USB memory deviceMusic List Option Menu Using and Sorting the Music ListSorting Standard for the Music List Playing the music group Playing a MusicPlaying a music file Playing the selected music filesMovie List Option Menu Using and Sorting the Movie ListSorting Standard for the Movie List Playing the movie group Playing a Movie FilePlaying a movie file Deleting the Photo/Music/Movie File While removing files, don’t remove the USB memory devicePicture Setting Picture/Music Settings Using Wiselink ProUsing the Setup Menu Sound SettingNetwork Connections Diagram Wiselink Pro-DLNA Setting the Dlna NetworkInstalling the Dlna Application Connecting to the Network Install the application File Using the Dlna ApplicationProgramme Screen Layout MethodShare  Cancelling a Shared Folder Applying the Current Settings  Sharing a FolderHelp  Setting the Access PermissionServer  Version Programme version information message box appearsUsing the Dlna Function You can control the volume of the played content Content Library Activating the Content LibraryStop Content Library mode and Returns to TV mode Exit Content Library modeUsing the Content Library Downloading New Contents Using Additional Content Using External USB Memory StoragePlaying and Exiting New Content To connect to Home Theater About Anynet Connecting Anynet+ DevicesTo connect to a TV Anynet+HDMI-CEC Setting Up Anynet+Scanning and Switching between Anynet+ Devices Anynet+ HDMI-CECAnynet+ Menu TV Remote Control Buttons Available in Anynet+ ModeRecording Troubleshooting for Anynet+ Listening through a Receiver Home theaterInfoLive Using InfoLive InfoLiveSet up the Region Using the Weather ServiceUsing the News Service Set up Weather OptionTo delete your favourite stocks Using the Stock ServiceSetting Favorite Stocks Items Position InfoLive Setup InfoLive’s Position Recommendations for Use Teletext Feature Part Contents Entering the menuSave Select a mode to save Position1 Position2 Position3 Using the Anti-Theft Kensington Lock depending on the modelWall-Mount Adjustment Remembering the PositionSecuring the TV to the Wall To avoid the TV from fallingTroubleshooting Before Contacting Service Personnel Plug your set into a different mains socketSpecifications Additional Terms of Service Acceptance of TermsSpecial Admonitions for International USE General Practices Regarding USE and Storage Trademark Information Copyrights and Copyright Agents