Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

➣Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

Plug & Play

Start Plug & Play.

Enter

1.Press the POWER button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.

➣We recommend setting the TV to "Home Use" mode for the best picture in your home environment.

➣"Store Demo" mode is only intended for use in retail environments.

➣If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button.

➣Please check that the antenna cable is connected correctly.

5.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

6.The message “Some DTV functions may not be available. Digital Scan?” is displayed. Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER button.

♦Yes: First an ATV search is performed and then a DTV ch. auto search is performed.

♦No: Only an ATV search is performed.

➣This function is supported for all countries except for the following countries: France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.

7.The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.

➣The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV channel is automatically updated.

➣If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV. After all the available channels are stored, the "Clock Set" menu appears.

➣Press the ENTER button at any time to interrupt the memorization process.

➣For detailed descriptions about DTV channel update, refer to page 31 of this manual.

After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.

8.Press the ENTER button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.

➣You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons on the remote control.

English - 11