Samsung BN68-01736C-00 user manual Check Points before Requesting Service, Symptom Solution

Page 62

Check Points before Requesting Service

Symptom

Solution

Anynet+ does not

■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+

work.

devices only.

 

■ Connect only one receiver.

 

■ Check if the Anynet+ device power cord is properly connected.

 

■ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.

 

■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

 

■ Check whether the TV remote control is in TV mode.

 

■ Check whether it is Anynet+ exclusive remote control.

 

■ Anynet+ doesn’t work at a certain condition. (Searching channels, Operating

 

WISELINK, Plug & Play, etc.)

 

■ When connecting or removing the HDMI 1.3 cable, please make sure to search

 

devices again or restart your TV.

 

■ Check if the Anynet+ Function of Anynet+ device is set on.

I want to start

■ Check if the Anynet+ device is properly connected to the TV and check if the

Anynet+.

Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.

 

■ Press the TV/DTV button on the TV remote control to switch to TV. Then press

 

the TOOLS button to show the Anynet+ menu and select a menu you want.

I want to exit Anynet+.

■ Select View TV in Anynet+ menu.

 

■ Press the SOURCE button on the TV remote control and select a device other

 

than Anynet+ devices.

 

■ Press any of P / and PRE-CHsuch to change to the

 

TV mode. (Note that the channel button operates only when a tuner-embedded

 

Anynet+ device is not connected.)

The Configuring

■ You cannot use the remote control when you are configuring Anynet+ or

Anynet+ connection

switching to a view mode.

message appears on

■ Use the remote control when the Anynet+ setting or switching to view mode is

the screen.

complete.

The Anynet+ device

You cannot use the play function when Plug & Play is in progress.

does not play.

 

The connected device

■ Check whether or not the device supports Anynet+ functions.

is not displayed.

■ Check whether or not the HDMI 1.3 cable is properly connected.

 

■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

 

■ Search Anynet+ devices again.

 

■ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI

 

cables may not support Anynet+ functions.

 

■ If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3

 

cable or power cord or a power failure, please repeat the device scan.

The TV programme

Check whether the antenna jack on the recording device is properly connected.

cannot be recorded.

 

The TV sound is not

 

output through the

Connect the optical cable between TV and the receiver.

receiver.

 

English - 60

Page 61 Page 63
Image 62
Page 61 Page 63
Contents LCD TV Still image may cause permanent damage to the TV screen Precautions When Displaying a Still ImageContact Samsung Worldwide Contents  Scanning and Switching between Anynet+  Using the Anti-Theft Kensington Lock Troubleshooting Before Contacting Service SymbolIf you elect to install the TV on your own Installing the Wall Mount KitPower Cord Cover-Bottom Cleaning Cloth List of PartsViewing the Control Panel Connect to the video and audio output jack on your PC Viewing the Connection PanelPC in PC / Audio DVI INHDMI2 R-AUDIO-L Common Interface Slot# Kensington Lock depending on the model Video or Video / R-AUDIO-L@ EXT 1, EXT Electronic Program Guide EPG display Viewing the Remote ControlTemporary sound switch- off Next channel Previous channelPlacing Your Television in Standby Mode Installing Batteries in the Remote ControlSwitching On and Off Mains lead is attached to the rear of your setViewing the Menus Using the Tools ButtonWith the power on, press the Menu button Plug & Play Press the Menu button to display the menu If you want to reset this featureStoring Channels Automatically Enter button Press the Enter button to select CountryColour System Auto/PAL/SECAM/NTSC4.43 Channel modeStoring Channels Manually Sound System BG/DK/I/LAdding channels Is active when Child Lock is selected to OnAdding / Locking Channels Locking channelsThen Sorting the Stored ChannelsAssigning Channels Names Press the or buttonEnter button Press the or button to select LNA, then press Fine Tuning Channel ReceptionLNA Low Noise Amplifier Enter button Press the Exit button to exitChanging the Picture Standard Press the Enter button again, to select ModeEasy Setting Press the Exit or Tools button to exitYou can set detailed picture settings Adjusting the Custom PictureConfiguring Detailed Settings on the Picture Black Adjust Off/Low/Medium/HighResetting the Picture Settings to the Factory Defaults Size Auto Wide/169/Wide Zoom/Zoom/43/Just Scan Configuring Picture OptionEnter Digital NR Off/Low/Medium/High/Auto Screen Mode 169/Wide Zoom/Zoom/43Blue Only Mode Off/On DNIe Off/Demo/OnViewing the Picture In Picture PIP Auto Volume Off/On Sound FeaturesMode Standard/Music/Movie/Speech/Custom SRS TS XT Off/OnSelecting the Sound Mode Connecting Headphones Sold separatelyPress Setting and Displaying the Current TimeSetting the Sleep Timer Enter buttonChoosing Your Language Switching the Television On and Off AutomaticallyAuto Power Off Melody Off/Low/Medium/High TV power on/off melody sound can be adjustedMelody / Entertainment / Energy Saving Melody does not playSelecting the Source Energy Saving Off/Low/Medium/High/AutoEditing the Input Source Names Previewing the DTV Menu System You can specify the channel for a fast channel search New Services or if you move the TV to a new locationUpdating the Channel List Manually Editing Your Favourite Channels Delete Renumber depending on the countryPreview Selecting Channel List Displaying Programme InformationViewing the EPG Electronic Programme Guide Information ThenYou can preset the default guide style Using the Scheduled ListSetting the Default Guide Adjusting the Menu Transparency Viewing All Channels and Favourite ChannelsSetting up the Parental Lock Selecting the Audio Format Setting the SubtitleSetting the Subtitle Mode You can activate and deactivate the subtitlesPress the Enter button Press the Exit button to exit Selecting the Audio DescriptionSelecting the Digital Text UK only Select the local time zone Selecting the Time Zone Spain onlyViewing Product Information Checking the Signal Information Upgrading the SoftwareViewing Common Interface Selecting the CI Common Interface MenuResetting Selecting the Preferred Language Subtitle, Audio or TeletextPreference This menu consists of 6 sub-menusHDMI/DVI Input Setting up Your PC Software Based on Windows XPDisplay Modes Auto Adjustment Setting up the TV with your PCPress the Source button to select PC mode Image ResetUsing the Wiselink Function Wiselink screen againOperations Using the Wiselink MenuUsing the Remote Control Button in Wiselink Menu Using the Photo Jpeg List Viewing a Slide ShowBackground Music Setting Using the Menu in the Photo List Start Slide ShowUsing the Menu during a Slide Show Slide Show Speed Select AllUsing the Option Menu RotateRepeat Music Using the MP3 ListUsing the Option Menu Play Music function information iconUsing the Setup Menu Screen SaverTo connect to Home Theater What is Anynet+?Connecting Anynet+ Devices Setting Up Anynet+ Scanning and Switching between Anynet+ Devices Select Setup, then press the Enter buttonRecord SetupSelect Device Menu on DeviceListening through a Receiver You can make a recording of a TV programme using a recorderRecording Press the Tools button. Then Press the Enter button toCheck Points before Requesting Service Symptom SolutionTeletext Feature English Entering the menu Adjust to the desired position using the ,,, buttonsAuto Wall-Mount Sold separately Remembering the PositionUsing the Anti-Theft Kensington Lock depending on the model Moving to the remembered positionDepending on the type of wall Securing the TV to the WallTo avoid the TV from falling WallTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications
Top Page Image Contents