Samsung HP-P3761 manual Changing Channels, Adjusting the Volume, Using Mute

Changing Channels

Using the Channel Buttons

Press the CH or CH button to change channels.

When you press the CH or CH button, the PDP changes channels in sequence. You will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.)

You will not see channels that were either erased or not memorized.

Directly Accessing Channels

Press the number buttons to go directly to a channel. For example, to select channel 27, press “2” then “7”. The TV will change channels when you press the second number.

When you use the number buttons, you can directly select channels that were either erased or not memorized. To select a channel over 100, press the +100 button. (For channel “112”, press the +100 button, then “1”, then “2”.

To change to single-digit channels (0~9) faster, press “0” before the single digit. (For channel “4” press “0”, then “4”.)

Using the PRE-CH button to select the previous channel

Press the PRE-CH button. The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then, use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

Using the Volume Buttons

Press the VOL or VOL button to increase or decrease the volume.

Using Mute

Using the MUTE Button

At any time, you can temporarily cut off the sound using the MUTE button.

Press the MUTE button and the sound cuts off.
1 The word “Mute” will appear in the lower-left
corner of the screen.		Mute
To turn mute off, press the MUTE button again, or
2 simply press the VOL	or VOL	button.

31