Samsung HP-S5073C, HP-S4273C manual Using Your TV as a Computer PC Display, English-41

PC Display

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1.First, click on “Control Panel” on the Windows start menu.

2.When the control panel window appears, click on “Appearance and Themes” and a display dialog-box will appear.

3.When the control panel window appears, click on “Display” and a display dialog-box will appear.

4.Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution)

Optimum: 1024 x 768 pixels

If a vertical-frequency option exists on your display settings dialog box,

the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture.

Video Signal	Resolution	Vertical	Horizontal	Vertical	Horizontal	HP-S4273C	HP-S5073C
	(Dot X Line)	Frequency (Hz)	Frequency (KHz)	Polarity	Polarity
	640 X 350	70.086	31.469	N	P	✔	✔
	720 X 400	70.087	31.469	P	N	✔	✔
	640 X 480	59.940	31.469	N	N	✔	✔
		70.000	35.000	N/P	N/P	✔	✔
		72.809	37.861	N	N	✔	✔
		75.000	37.500	N	N	✔	✔
IBM PC / AT	800 X 600	56.250	35.156	N/P	N/P	✔	✔
		60.317	37.879	P	P	✔	✔
Compatible
		70.000	43.750	N/P	N/P	✔	✔
		72.188	48.077	P	P	✔	✔
		75.000	46.875	P	P	✔	✔
	848 X 480	60.000	31.020	P	P	✔	✔
		74.769	37.684	N	P	✔	✔
	1024 X 768	60.004	48.363	N	N	✔	✔
		70.069	56.476	N	N	✔	✔
		72.000	57.672	N/P	N/P	✔	✔
		75.029	60.023	P	P	✔	✔
	1280 X 720	59.855	44.772	P	N		✔
	1360 X 768	60.015	47.712	P	P		✔

•The interlace mode is not supported.

•The TV operates abnormally if a non-standard video format is selected.

•The table above conforms to IBM/VESA regulations and is based on using the Analog Input.

•“✔” mark means that this mode can be supported.

➢• The PC text quality of HP-S4273C is optimum in XGA mode (1024 x 768@60Hz).

• The PC text quality of HP-S5073C is optimum in WXGA mode (1360 x 768@60Hz).

(Three pixels on left, right, top and bottom will be grayed out at the resolution setting of 1360x768@60Hz. This is not a mechanical problem but a result caused by the pixel difference between the standard resolution and the PDP panel.)

•When this TV is used as a PC display, 32-bit color is supported.

•Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a TV.

•If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4kHz (horizontal).

•In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or SOURCE button on the side panel to enter a VIDEO mode. Also, make sure that the PC is connected.

English-41