Samsung BN68-02581A-03, PN50C6400, PN50C6500 Troubleshooting, Issues Solutions and Explanations

Page 54

Other Information

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit “www.samsung.com,” then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Issues

Solutions and Explanations

Poor picture

First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.

 

(go to MENU - Support - Self Diagnosis - Picture Test)(p. 24)

 

If the test image is properly displayed, the poor picture may caused by the source or signal.

 

 

The TV image does not look as good as it

• If you have an analog cable/satellite box, upgrade to an HD digital set top box. HD Box Use HDMI or

did in the store.

Component cables to deliver HD (high definition) picture quality.

 

• Cable/Satellite subscribers: Try HD stations from the channel line up.

 

• Antenna connection: Try HD stations after performing Auto program.

 

Many HD channels are upscaled from SD(Standard Definition) contents.

 

• Adjust the Cable/Sat box video output resolution to 1080i or 720p.

 

 

The picture is distorted: macroblock error,

• Compression of video contents may cause picture distortion, especially in fast moving pictures such

small block, dots, pixelization.

as sports and action movies.

 

• Low signal level can cause picture distortion. This is not a TV problem.

 

• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital

 

TV.

 

 

Color is wrong or missing.

• If you’re using a component connection, make sure the component cables are connected to the

 

correct jacks. Incorrect or loose connections may cause color problems or a blank screen.

 

 

There is poor color or brightness.

• Adjust the Picture options in the TV menu (go to Picture mode / Color / Brightness / Sharpness)

 

(p. 15).

 

• Adjust Energy Saving option in the TV menu (go to MENU – Picture – Eco Solution –

 

Energy Saving (p. 15).

 

• Try resetting the picture to view the default picture settings (go to MENU - Picture - Picture Reset)

 

(p. 18).

 

 

There is a dotted line on the edge of the

• If the picture size is set to Screen Fit, change it to 16:9 (p. 17).

screen.

• Change cable/satellite box resolution.

 

 

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of

 

component input 1 on the TV.

 

 

When changing channels, the picture

• If connected with a cable box, please try to reset the cable box (reconnect the AC cord and wait until

freezes or is distorted or delayed.

the cable box reboots. It may take up to 20 minutes).

 

• Set the output resolution of the cable box to 1080i or 720p.

 

 

Sound Problem

First of all, please perform the Sound Test to confirm that your TV audio is properly operating

 

(go to MENU - Support - Self Diagnosis - Sound Test (p. 24).

 

If the audio is OK, the sound problem may caused by the source or signal.

 

 

There is no sound or the sound is too low

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.

at maximum volume.

 

 

 

The picture is good but there is no sound.

• Set the Speaker Select option to TV Speaker in the Sound menu (p. 19).

 

• If you are using an external device, make sure the audio cables are connected to the correct audio

 

input jacks on the TV.

 

• If you are using an external device, check the device’s audio output option (ex. you may need to

 

change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).

 

• If you are using a DVI to HDMI cable, a separate audio cable is required.

 

• If your TV has a headphone jack, make sure there is nothing plugged into it.

 

• Reboot the connected device by reconnecting the device’s power cable.

 

 

The speakers are making an inappropriate

• Check cable connections. Make sure a video cable is not connected to an audio input.

noise.

• For antenna or Cable connections, check the signal strength. Low signal level may cause sound

 

distortion.

 

• Perform the Sound Test as explained above.

 

 

54 English

Image 54
Contents Samsung Electronics Canada Inc., Customer Service Samsung Electronics America, Inc ChallengerUser Instructions EnglishContents List of Features AccessoriesInstall the Stand Stand 1EAScrews 10EA Viewing the Control Panel Buttons on the remote controlRemote control sensor Product color and shape may vary depending on the modelReturns to the previous menu Viewing the Remote ControlTurns the TV on and off Displays information on the TV screenPDP device may interfere with an amateur radio or AM radio Connecting to an AntennaPlug & Play Initial Setup Press the or button, then press the ENTEREbutton. SelectConnecting to an AV Device ConnectionsConnecting to an Audio Device Digital Audio OUT OpticalMode Resolution Horizontal Frequency Vertical Frequency Connecting to a PCUsing an HDMI/DVI Cable or a D-sub Cable Sync PolarityEdit Name How to Navigate MenusSource List Changing the Input SourceAntenna Air / Cable t Channel ListAdd to Favorite / Delete from Favorite Auto ProgramProgrammed Other FeaturesClear Scrambled Channel Editing ChannelsAdvanced Settings Mode tEco Solution Fine TuneOff Turns the Expert Pattern function off Picture OptionsPicture Options OO MENUm→ Picture → Picture Options →Component 480i, 480p Zoom2 DTV1080i 169, 43, Wide Fit Available only in Hdmi mode169, Zoom1 Screen FitScreen Picture Reset OK / CancelAuto Adjustment t SRS TheaterSound tSRS TruSurround HD Off / On t Auto Volume Off / Normal / NightSound Reset OK / Cancel SRS TruDialog Off / OnSetting the On / Off Timer Setting the TimeUsing the Sleep Timer TimeSecurity Locking ProgramsCaption OO MENUm→ Setup → EntereMenu Language Xx The rating titles For example Humor Level..etcPIP t Wireless Remote Control Off / OnGeneral Picture In Picture PIPSelf Diagnosis Software UpgradeLegal Notice HD Connection GuideModem Port on the Wall Connecting to a Wired NetworkNetwork Connection LAN Port on the WallNetwork Setup Network Setup AutoNetwork Setup Manual Network Type Wired Network Setup Network TestConnecting to a Wireless Network WallNetwork Setup Samsung Auto Configuration Boot upNetwork Setup Pbcwps Security Key Entered ~9 NumberDelete Network Setup Ad-Hoc SWL connect SWL Samsung Wireless LinkAdvanced Features English Device to connectConnecting a USB Device Connecting to your PC through a networkMedia Play Page Screen Display Sorting standard is different depending on the contentsVideos Name File extension Format1920x1080 Yy Supported Video FormatsMbps Supported Lossless audioMusic Playing Multiple Files List section using the Green buttonPhotos Media Play Additional FunctionsSettings Same file name as the video AudioAnynet+ What is Anynet+? t AdvancedTo connect to a Samsung Home Theater Features Home Theater Anynet+Setting Up Anynet+ Switching between Anynet+ DevicesRecording Troubleshooting for Anynet+ Listening through a ReceiverGetting Started with Internet@TV Internet@TVSetting up Internet@TV LoginAdvanced Features Using the Internet@TV service Samsung AppsYy Game Displays various games such as sudoku and chess Sidebar Mode YahooProfile Widget Widget GalleryWidget to My Profile Troubleshooting for Internet@TV Problem Possible SolutionCheck with the service provider Message / Media / ScreenShare SetupSetting Up AllShare About AllShareMy Mobile Call to another person, or send to SMSInstalling the Wall Mount Other Information EnglishBlanking Bracket Product Family Inches Securing the Installation SpaceAssembling the Cables QuantityTV-Holder BN96-15753A Securing the TV to the WallTV-Holder Kit Sold Separately Screw M8 x L19Troubleshooting Issues Solutions and ExplanationsMake sure your connected devices are powered on On, refer to ‘Remote control does not work’ belowThere is no signal Make sure the Network Connection is set to Wireless pVolume Mode Not Supported message Image Retention Burn In IssueCable/set top box remote control Degree connectorsSpecifications LicenseEnglish Other Information Model name DimensionsFront view / Side view Jack panel detail / Rear viewFavorite Channel Film Mode Fine Tune Flesh Tone Frequency IndexAllShare Amplify Antenna Anynet+ This page is intentionally Left blank