Samsung BN68-02577A-04 Melody Off / Low / Medium / High, Software Upgrade, Self Diagnosis

Page 22

Basic Features

NOTE

xx Digital Caption Options are available only when Default and Service1 ~ Service6 can be selected in Caption Mode.

xx The availability of captions depends on the program being broadcasted.

xx The Default setting follows the standards set by the broadcaster.

xx The Foreground and Background cannot be set to have the same color.

xx You cannot set both the Foreground Opacity and the Background Opacity to Transparent.

Melody (Off / Low / Medium / High)

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

■■ Signal Strength: (Digital channels only) An HD channel’s

reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Software Upgrade

Set so that a melody plays when the TV is turned on or off. The Melody does not play.

xx When no sound is output from the TV because the MUTE button has been pressed.

xx When no sound is output from the TV because the volume has been reduced to minimum with the VOL

button.

xx When the TV is turned off by Sleep Timer function.

Samsung may offer upgrades

 

for your TV’s firmware in

 

the future. Please visit

 

Samsung.com or contact

 

the Samsung call center at

 

1-800-SAMSUNG (726-7864)

 

to receive information about

 

downloading upgrades and

USB Drive

using a USB drive. Upgrades

 

will be possible by connecting

 

a USB drive to the USB port.

 

TV Side Panel

USB HDMI IN 3

Support Menu

OO MENUm→ Support → ENTERE

Self Diagnosis

Self Diagnostic might take few seconds, this is part of the normal operation of the TV.

■■ Picture Test (Yes / No): Use to check for picture problems.

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

■■ Sound Test (Yes / No): Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu.

The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

When software is upgraded, video and audio settings you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can easily reset them after the upgrade.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.

22 English

Image 22
Contents L5R 4B2 Canada SAMSUNG726-7864 Samsung Electronics Canada Inc., CustomerBN68-02577A-04 User Instructions EnglishContents Getting Started List of FeaturesAccessories Input Cables Sold SeparatelyInstall the Stand Viewing the Control Panel Buttons on the remote controlPower Indicator Remote control sensor Product color and shape may vary depending on the modelViewing the Remote Control Displays and selects the available video sources pSelect the Home Use mode. Store Demo mode is for retail Connecting to an AntennaPlug & Play Initial Setup Select the desired OSD On Screen Display languageConnections Connecting to an AV DeviceConnections Connecting to an Audio Device Digital Audio OUT OpticalHorizontal Vertical Pixel Clock Sync Polarity Mode Connecting to a PCUsing an HDMI/DVI Cable or a D-sub Cable +/+Source List Basic FeaturesHow to Navigate Menus Edit NameAntenna Air / Cable t Channel ListAdd to Favorite / Delete from Favorite Auto ProgramProgrammed Other FeaturesClear Scrambled Channel Editing ChannelsFine Tune Advanced SettingsMode Picture Options Picture OptionsMode t Picture Reset Reset Picture Mode / CancelAuto Adjustment t ScreenEqualizer Auto Volume Off / OnSound Reset Reset All Reset Sound Mode / Cancel SRS TruSurround HD Off / OnTimer Using the Sleep TimerSetting the On / Off Timer ChipProgramming intended for children under age Eco Sensor Off / On Game Mode Off / OnEnergy Saving Off / Low / Medium / High LanguageSelf Diagnosis Software UpgradeMelody Off / Low / Medium / High HD Connection GuideConnecting a USB Device Advanced FeaturesUsing the Media Play Menu Media PlayPhoto Music Anynet+ SetupAnynet+ Device Home Theater Setting Up Anynet+ Recording Switching between Anynet+ DevicesListening through a Receiver Troubleshooting for Anynet+ 04Features Advanced EnglishOther Information Installing the Wall MountBlanking Bracket 80~ Securing the Installation SpaceProduct Family Inches Vesa Spec Standard Quantity 05InformationOherTV-Holder Kit Sold Separately Installing the TV-HolderSecuring the TV to the Wall TV-Holder BN96-15753AIssues Solutions and Explanations Troubleshooting05InformationOher English Make sure your connected devices are powered on On, refer to Remote control does not work belowThere is no signal ContentsVolume Mode Not Supported message Image Retention Burn In IssueCable/set top box remote control Degree connectorsSpecifications LicenseDimensions Index Film Mode Fine Tune Flesh Tone FrequencyAntenna Anynet+

BN68-02577A-04, PN50C450 specifications

The Samsung PN50C450, model number BN68-02577A-04, is a notable entry in the world of plasma televisions, designed to deliver an immersive viewing experience. With a screen size of 50 inches, it strikes a balance between full immersion and suitability for smaller living spaces. The PN50C450 is well-regarded for its excellent picture quality, thanks to the plasma technology that enhances color accuracy and contrast.

One of the standout features of the PN50C450 is its native resolution of 720p, which, while not Full HD, still provides a clear and vibrant picture. The Plasma display panel contributes to deeper blacks and brighter whites, allowing for a dynamic range that significantly enhances the viewing experience, especially in darker environments. The TV supports a color depth of 16.7 million colors, delivering vivid and lifelike images during both bright and dim scenes.

The TV includes Samsung's Wide Color Enhancer technology, which plays a key role in improving the overall color accuracy, enabling a more realistic representation of images. This technology ensures that shades and tones are true to life, captivating the viewer in a way that standard televisions might not achieve.

In terms of connectivity, the Samsung PN50C450 is well-equipped for the digital age. It comes with multiple HDMI ports, allowing users to connect various devices such as gaming consoles, Blu-ray players, and streaming devices seamlessly. Component and composite inputs provide additional options for connectivity, making it a versatile choice for a variety of home entertainment setups.

The design of the PN50C450 is sleek and modern, featuring thin bezels that maximize the screen area for a more immersive experience. Its thoughtful engineering includes a sturdy stand, which can be adjusted or removed for wall mounting options, providing flexibility in setting it up to suit any space.

Furthermore, the Samsung PN50C450 is energy-efficient, receiving commendations for its power-saving features. With its compelling combination of advanced plasma technology, robust features, and user-friendly interfaces, the PN50C450 is an excellent choice for consumers looking for quality home entertainment solutions in the mid-range segment.