That are used to create the images on the screen

Issues	Solutions and Explanations
The remote control does not work.	• Replace the remote control batteries with the poles (+/–) in the right direction.
	• Clean the sensor’s transmission window on the remote.
	• Try pointing the remote directly at the TV from 5~6 feet away.

The TV is making a humming noise.	• Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges
	that are used to create the images on the screen.
	• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the
	brightness lower.
	• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard
	surface. Also try rerouting your connection cables.
	• Improper installation of wall mount can create excessive noise.

Image Retention (Burn In) Issue.	• To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.
	Pixel Shift technology enables you to set picture movement up/down (Vertical Line) and side to side
	(Horizontal Dot).

The cable/set top box remote control	• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the
doesn’t turn the TV on or off, or adjust the	SAMSUNG TV code.
volume.

A “Mode Not Supported” message	• Check the supported resolution of the TV, and adjust the external device’s output resolution
appears.	accordingly. Refer to the resolution settings on page 11 of this manual.

Caption on TV menu is greyed out.	• Caption can not be selected in the TV menu when connected via HDMI or Component (p. 21).
	• Caption must be activated on the external device (p. 21).

There is a plastic smell from the TV.	• This smell is normal and will dissipate over time.

The TV Signal Strength is unavailable in	• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 22).
the Self Diagnostic Test menu.

The TV is tilted to the side.	• Remove the base stand from the TV and reassemble it.

The channel menu is greyed out	• The Channel menu is only available when the TV source is selected.
(unavailable).

Your settings are lost after 30 minutes or	• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
every time the TV is turned off.	the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
	SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play → ENTERE(p. 8).
You have intermittent loss of audio or	• Check the cable connections and reconnect them.
video.	• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
	flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
	degree connectors.

You see small particles when you look	• This is part of the product’s design and is not a defect.
closely at the edge of the frame of the TV.

POP (TV’s internal banner ad) appears on	• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).
the screen.

✎✎Some of above pictures and functions are available at specific models only.

05InformationOher

English 35

BN68-02577A-04, PN50C450 specifications

The Samsung PN50C450, model number BN68-02577A-04, is a notable entry in the world of plasma televisions, designed to deliver an immersive viewing experience. With a screen size of 50 inches, it strikes a balance between full immersion and suitability for smaller living spaces. The PN50C450 is well-regarded for its excellent picture quality, thanks to the plasma technology that enhances color accuracy and contrast.

One of the standout features of the PN50C450 is its native resolution of 720p, which, while not Full HD, still provides a clear and vibrant picture. The Plasma display panel contributes to deeper blacks and brighter whites, allowing for a dynamic range that significantly enhances the viewing experience, especially in darker environments. The TV supports a color depth of 16.7 million colors, delivering vivid and lifelike images during both bright and dim scenes.

The TV includes Samsung's Wide Color Enhancer technology, which plays a key role in improving the overall color accuracy, enabling a more realistic representation of images. This technology ensures that shades and tones are true to life, captivating the viewer in a way that standard televisions might not achieve.

In terms of connectivity, the Samsung PN50C450 is well-equipped for the digital age. It comes with multiple HDMI ports, allowing users to connect various devices such as gaming consoles, Blu-ray players, and streaming devices seamlessly. Component and composite inputs provide additional options for connectivity, making it a versatile choice for a variety of home entertainment setups.

The design of the PN50C450 is sleek and modern, featuring thin bezels that maximize the screen area for a more immersive experience. Its thoughtful engineering includes a sturdy stand, which can be adjusted or removed for wall mounting options, providing flexibility in setting it up to suit any space.

Furthermore, the Samsung PN50C450 is energy-efficient, receiving commendations for its power-saving features. With its compelling combination of advanced plasma technology, robust features, and user-friendly interfaces, the PN50C450 is an excellent choice for consumers looking for quality home entertainment solutions in the mid-range segment.

Issues