Picture Reset Reset Picture Mode / Cancel

Basic Features

xx After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:

1.Press the ◄ or ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲, ▼, ◄ or ► button to move the picture.

4.Press the ENTEREbutton.

5.Press the ◄ or ► button to select Reset.

6.Press the ENTEREbutton.

xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

xx Settings can be adjusted and stored for each external device you have connected to an input on the TV.

Input Source	Picture Size
ATV, AV,	16:9, Zoom1,
Component (480i, 480p)	Zoom2, 4:3
DTV(1080i),	16:9, 4:3, Wide Fit,
Component (1080i, 1080p),	Screen Fit
HDMI (720p, 1080i, 1080p)

■■ Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

✎✎ When the signal is weak, try other options until the best picture is displayed.

■■ HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.

✎✎ Available only in HDMI mode.

■■ Film Mode (Off / Auto): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.

✎✎ Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■■ Screen Burn Protection: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to program the time between movement of the picture in minutes.

16 English

Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after-images on the screen.

✎✎ Optimum condition for pixel shift

	Item	TV/AV/Component/
	Item	HDMI/PC
		HDMI/PC
Horizontal	0~4	4
Vertical	0~4	4

Time (minute)	1~4 min	4 min

✎✎ The Pixel Shift value may differ depending on the TV size (inches) and mode.

✎✎ This function is not available in the Screen Fit mode.

Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

✎✎ The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again.

✎✎ Press any key on the remote control to cancel this feature.

Side Gray (Dark / Light): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.