Samsung BN68-02625A-03 Securing the TV to the Wall, TV-Holder Kit Sold Separately, Screw M8 x L19

Page 46

Other Information

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the included Safety Flyer with your TV. For added stability and safety, you can purchase and install the anti fall device as described below.

The TV-Holder Kit (Sold Separately):

The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size M4xL20 wood screw.

TV-Holder (BN96-15753A)

Screw (M8 x L19)

Installing the TV-Holder

1.Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in

the TV-Holder Kit that is designated for your TV.

✎✎ Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.

2.Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed. ✎✎ If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a

molly to anchor the screw.

3.Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is fixed. See the illustrations below. ✎✎ Install the TV close to the wall so that it does not fall.

✎✎ When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes.

✎✎ Check the cord occasionally to make sure it is secure. ✎✎ Before moving the TV, separate the connected cord first.

4.Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

To purchase the TV-Holder Kit, contact Samsung Customer Care

––In the United States: 1-800-SAMSUNG (1-800-726-7864)

––In Canada: 1-800-SAMSUNG (1-800-726-7864)

46 English

Page 45 Page 47
Image 46
Page 45 Page 47
Contents
Samsung Electronics Canada Inc., Customer Service Contact Samsung WorldwideInstallation with a wall-mount Securing the Installation SpaceInstallation with a stand Still image warningContents Cleaning Cloth BN63-01798B List of FeaturesAccessories Input Cables Sold SeparatelyFollow the steps below to connect the TV to the stand Install the StandSee separate guide for installing the stand Stand 1EA Screws 10EA Getting StartedViewing the Control Panel Buttons on the remote controlSpeakers Remote control sensor Product color and shape may vary depending on the modelStarted Viewing the Remote ControlPress to directly access channels Turns the TV on and offPower Input Connecting to an AntennaPlug & Play Initial Setup Enjoy your TVConnecting to an AV Device ConnectionsVideo Cable Not Supplied Using an HDMI/DVI cable or a D-sub cable Connecting to an Audio DeviceConnecting to a PC Connections EnglishSync Polarity Mode Resolution Horizontal Frequency Vertical Frequency+/+ Edit Name How to Navigate MenusSource List Changing the Input SourceAntenna Air / Cable t Channel ListAdd to Favorite / Delete from Favorite Auto ProgramProgrammed Other FeaturesClear Scrambled Channel Editing ChannelsFine Tune Eco SolutionMode Picture Options Advanced SettingsAdvanced Settings Changing the Picture OptionsSetting up the TV with Your PC Picture Reset OK / CancelAuto Adjustment t ScreenVirtual Surround Off / On Auto Volume Off / Normal / NightEqualizer Preferred LanguageSpdif Output Sound Reset OK / CancelTime Security Locking ProgramsMenu Language OO MENUm→ Setup → EntereCaption PIP t Network Network Type / Network Setup / Network TestGeneral Picture In Picture PIPHD Connection Guide Software UpgradeSelf Diagnosis Contact SamsungModem Port on the Wall Connecting to a Wired NetworkNetwork Connection LAN Port on the WallNetwork Setup Network Setup AutoNetwork Setup Manual Network Type Wired Network Setup Network TestAdvanced Connecting to a Wireless NetworkFeatures BelowNetwork Setup PBC WPS Security Key Entered ~9 Number Network Setup Ad-HocAdvanced Features English DeleteNetwork Setup Manual USB Mass Storage Class MSC device Connecting a USB DeviceConnecting to your PC through a network MENUm→ Application → Media PlayAdvanced Features Videos Sorting standard is different depending on the contentsScreen Display 1920x1080 Yy Supported Video FormatsMbps MkvMusic PhotosMedia Play Additional Functions List section using the Green buttonPlaying Multiple Files Monthly Sorts and shows photo files by monthSettings Anynet+ Anynet+Device TV Rear Panel Switching between Anynet+ Devices Setting Up Anynet+Recording Troubleshooting for Anynet+ Listening through a ReceiverMessage / Media / ScreenShare SetupSetting Up AllShare About AllShareMy Mobile Other Information Assembling the CablesInstalling the Wall Mount Blanking BracketAnti-theft Kensington Lock TV-Holder BN96-15753A Securing the TV to the WallTV-Holder Kit Sold Separately Screw M8 x L19Issues Solutions and Explanations TroubleshootingOther Information English Make sure the Network Connection is set to Wireless p On, refer to Remote control does not work belowThere is no signal Try network test in Setup menu pCaption must be activated on the external device p Storage and MaintenanceDegree connectors Every time the TV is turned offLicense Specifications Dimensions Index Favorite Channel Film Mode Fine Tune Flesh Tone FrequencyAllShare Amplify Antenna Anynet+ This page is intentionally Left blank