Samsung 650FP-2, 650MP-2 user manual Wall Bracket Angle Adjustment

Page 23
Wall Bracket Angle Adjustment

Introduction

4.Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.

A -

LCD Display

B -

Wall Bracket

C -

Wall

Wall Bracket Angle Adjustment

Adjust the bracket angle to -2° before installing it on the wall.

1.Fix the product to the wall bracket.

2.Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle.

Manual background Note

You can adjust the bracket angle between -2° and 15°.

Image 23
Contents User Manual SyncMaster 650MP-2, 650FP-2LCD Display Warning / Caution Safety InstructionsPower NotationalInstallation Clean Connections Connecting a ComputerOthers Otherwise, this may result in an explosion or fire Set a resolution and frequency appropriate to the productWhen using headphones or earphones, do not turn the volume too high This may result in a product malfunction, electric shock, or fireThe product may fall and cause personal injury or death When replacing the battery, insert it with the right polarity +This reduces eye fatigue Otherwise, it may fall and result in personal injury This may reduce the lifetime of the product, and may result in fireDo not use a humidifier near the product If a spark occurs, it may cause an explosion or fireUnpacking Package ContentsChecking the Contents of the Package IntroductionSold separately ManualsCables OthersMENU button MENU Adjust buttons Left-Right buttons / Volume buttonsYour LCD Display Front Ferrite CoreRear Power buttonPower indicator Remote Control SensorRGB IN PC Connection Terminal In- put POWER S/W ON / OFF OPOWER RS232C OUT/IN RS232C Serial PORTAV IN VIDEO DVI/RGB/HDMI AUDIO IN PC/DVI/ HDMI Audio Connection Terminal InputAV/COMPONENT AUDIO IN R-AUDIO L DVI OUTSBB Lcok Remote ControlBNC OUT R, G, B, H, V BNC Terminal Output 6. SOURCE 1. POWER 2. OFF 3. Number Buttons 4. DEL / GUIDE but- ton 5. - VOL +POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU Press the button to change the input signal SOURCEYou can select MTS Multichannel Television Stereo mode DUALMechanical Layout Mechanical Layout Installation VESA Bracket Components DimensionsWall Bracket Installation Wall Bracket AssemblyHinge Left Introduction There are two hingesleft and right. Use the correct oneCaptive Screw Wall BracketTo mount the product on the wall bracket Wall Bracket Angle Adjustment Introduction Connections Connecting AV Devices Connecting to Other devicesConnecting the BNC to BNC cable Connecting to a CamcorderConnecting Using a HDMI Cable Connecting Using a DVI CableConnecting a DVD Player Connecting Using a DVI to HDMI CableConnecting a DTV Set Top Cable/Satellite Box Connecting to an Audio System Uninstall MDC Multiple Display Control InstallationInstallation Problems Main Screen IntroductionSelect Button Port SelectionSafety Lock Main IconsPower Control 1 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer Info Grid shows some basic information necessary to Power ControlThe Power Control feature is available for all displays Input SourcePC Mode Image Size PC, BNC, DVI The Input source of TV works only on TV model Image Size TV, AV, S-Video, Component, DVIHDCP, HDMI, DTVThe Input source of MagicInfo works only on MagicInfo model The Auto Wide mode is available only for TV, AV, and S-Video TimeAt On Time Setup, MagicInfo Source functions only for MagicInfo Model PIP PIP SizeAt On Time Setup, TV Source functions only for TV Model PIP Size can be controlled with turning on the LCD Display power PIP PIP SourceSettings Picture Color Temp is only enabled if the Color Tone is set to Off Settings Picture PCSettings Audio The Input source of TV works only on TV model Image Lock Maintenance Lamp ControlMaintenance Scroll Maintenance Video Wall z Select a display from Display Selection z The place will be set up by pressing a number in the selected mode1 Video Wall 2 Video Wall Screen divider The screen can be divided intoYou may not operate this function in MagicInfo TroubleshootingSettings Value Display In Multiple Display Mode Page PC / DVI / BNC AV Component HDMI MagicInfo Adjusting the LCD DisplayInput Available Modes Source ListOff On SourcePosition SwapSize High Medium Low Opaque TransparencyEdit Name 2. Internet Picture PC / DVI / BNC / MagicInfo Mode Available ModesMagicBright 1. Entertain2. Brightness Custom4. Custom 1. Contrast1. Red Color ToneColor Control 1. Off 2. Cool 3. Normal 4. Warm 5. CustomFine Color TempImage Lock CoarseSignal Balance Auto Adjustment3. B-Gain Signal Control1. R-Gain 2. G-Gain6. B-Offset HDMI Black Level4. Color PIP Picture1. Normal 2. Low 1. Off 2. On Dynamic ContrastLamp Control 5. TintMode Brightness SensorPicture AV / HDMI / Component Mode Available Modes 2. Standard 3. Movie 4. Custom ContrastBrightness Dynamic, Standard, Movie, or Custom can be activated 1. Dynamic1. Off 2. Cool2 SharpnessColor Tint3. Cool1 4. Normal 5. Warm1 6. Warm2 Digital NR Digital Noise Reduction Film Mode 1. Off 2. On Sound Available Modes 1. Standard BassTreble BalanceSound Select Auto VolumeSRS TS XT 1. Internal Setup Available ModesSpeaker Select 1. Main 2. SubHDMI MagicInfo LanguageTime Clock Set1. Off Sleep TimerOn Timer Off Timer1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PINMenu Transparency Video Wall LockEnergy Saving 2. Natural FormatHorizontal 1. FullScreen Divider Safety ScreenVertical Pixel Shift Pixel Shift 1. Scroll Timer TimerMode-Scroll 1~5 sec Mode-Bar, Eraser 10~50 sec PeriodScroll 2. Bar 3. Eraser1. Off 2. Light 3. Dark Resolution SelectEraser Side Gray1. Off 2. 1024 X 3. 1280 X 4. 1360 x 5. 1366 X Power On AdjustmentOSD Rotation ResetImage Reset Color ResetID Input ID SetupMulti Control Available Modes Multi ControlMagicInfo Available Modes MagicInfo Adjusting the LCD Display 3. Select Language - step Shows the settings that have been selected by the user Warning Messages TroubleshootingSelf-Test Feature Check Maintenance and CleaningCheck List Symptoms and Recommended ActionsProblems related to the Installation PC Mode Q Not Optimum Mode message Problems related to the ScreenQ Check Signal Cable message Problems related to the Remote Control Problems related to AudioQ & A Troubleshooting Power Supply SpecificationsResolution Input Signal, TerminatedPlug and Play Capability PowerSaverVESA Mounting Interface Environmental considerationsPreset Timing Modes Vertical Frequency Horizontal FrequencyPRODUCT INFORMATION Image Retention Free What is Image Retention ?Information For a Better DisplayInformation Power Off, Screen Saver, or Power Save ModeChange the Color Information periodically Apply the Screen Pixel function on Product Change the characters color periodicallyApply the Screen Scroll function on Product Apply the Screen Bar function Apply the Screen Erasing function on ProductSymptom Horizontal / Vertical Bar with Black Color move up and down Symptom 2 Vertical blocks move while erasing the displayLatin America AppendixContact SAMSUNG WORLDWIDE North AmericaEurope Asia Pacific Africa TermsMiddle East Information in this document is subject to change without notice Correct DisposalAuthority Correct disposal of batteries in this product - Europe onlyAppendix