You can control your set-top-box or satellite box with the Samsung Smart Control. To establish control, you must first set up theIR extender cable. If you don'thave an STB, skip this section.
1 Connect theIR extender cable to the TV'sIR output connector.
IR Out
Connect the
IR Extender Cable here.
Place the transmitter end within 4 inches of the set-top-box's remote control sensor.
2Position the transmitter end within 4 inches (1 0 em) of the set-top-box'sremote control sensor, pointing in the direction of the sensor. Make sure there are no obstacles between the transmitter end of theIR extender cable and the set- top-box or satellite box. Any obstacles will interfere with the transmission of the remote control signals.
3 Finalize control of your set-top or satellite box when you run Initial Setup.