Setting up the Universal Remote Control
Lets you control a
✎✎ The Universal Remote Control can adjust TV's volume, but STB's volume cannot be adjusted. Watch STB after adjusting STB's volume to appropriate level.
✎✎ Depending on the version of an application, the Universal Remote Setup instructions may differ. In this case, please follow the instructions on the screen.
To connect the external device to your Smart Touch Control, follow these steps:
1.Select Add a device to control, and then press the Touch Pad.
2.Select an external device from the connected devices, and then press the Touch Pad.
What do you want to do?
Add a device to control
View remote control settings
Which device do you want to control?
Select a device to control. The device you select must be powered on and connected to your TV.
Previous
Previous
Next
3.Select the port used to connect the external device, and then press the Touch Pad.
✎✎ Make sure that the selected device is on. If it is turned off, turn the power on and press Refresh.
Which port is your
HDMI1 | Select the port that the | |
| ||
HDMI2 | to. | |
| ||
HDMI3 | If the port you want to | |
| select is deactivated, | |
AV | please power on | |
box you want to connect | ||
| ||
| and press the refresh | |
Component | button. |
Refresh
Previous
Next
4.Select Search brands/TV service providers, and then press the Touch Pad. A keyboard and an entry field appear. Enter the first few letters of the brand name of your device using the Smart Touch Control, and then select Done at the bottom of the keyboard. In the list that appears below the entry field, select the brand name of your device, and then press the Touch Pad.
✎✎ If you want to search the brand of STB (Set- Top box), you can search the STB by using the brand name or a cable provider.
What is the brand/TV service provider of
Search brands/TV service providers
Select 'Search brands / TV service provider' then enter the brand name/service provider of your
Previous
Next