Samsung BN68-03165A-01 Securing the TV to the Wall, TV-Holder Kit Sold Separately, Screw M8xL19

Page 46

Other Information

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the included Safety Flyer with your TV. For added stability and safety, you can purchase and install the anti fall device as described below.

The TV-Holder Kit (Sold Separately):

The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size M4xL20 wood screw.

TV-Holder (BN96-15753A)

Screw (M8xL19)

Installing the TV-Holder

1.Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in the TV-Holder Kit that is

designated for your TV.

Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.

2.Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.

If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a molly to anchor the screw.

3.Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is fixed. See the illustrations below. Install the TV close to the wall so that it does not fall.

When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes. Check the cord occasionally to make sure it is secure.

Before moving the TV, separate the connected cord first.

4.Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

To purchase the TV-Holder Kit, contact Samsung Customer Care

––In the United States: 1-800-SAMSUNG (1-800-726-7864)

––In Canada: 1-800-SAMSUNG (1-800-726-7864)

46 English

Image 46
Contents Samsung Electronics Canada Inc., Customer Service Contact Samsung WorldwideInstallation with a wall-mount Securing the Installation SpaceInstallation with a stand Still image warningContents Cleaning Cloth BN63-01798B List of FeaturesAccessories Component Composite AV Coaxial RFInstall the Stand See separate guide for installing the stand Stand 1EAViewing the Control Panel Buttons on the remote controlPPower Turns the TV on or off Standby mode Product color and shape may vary depending on the modelDisplays Media Play p Viewing the Remote ControlTurns the TV on and off Returns to the previous menuEnjoy your TV Connecting to an AntennaPlug & Play Initial Setup Press the or button, then press the ENTEREbutton. SelectConnecting to an AV Device ConnectionsConnecting to an Audio Device Digital Audio OUT OpticalMode Resolution Horizontal Frequency Vertical Frequency Connecting to a PCUsing an HDMI/DVI Cable or a D-sub Cable Sync PolarityEdit Name How to Navigate MenusSource List Changing the Input SourceAuto Program Channel ListAntenna Air / Cable t Seeing ChannelsProgrammed Other FeaturesClear Scrambled Channel Editing ChannelsFine Tune Eco SolutionAdvanced Settings ModeOff Turns the Expert Pattern function off Picture OptionsPicture Options OO MENUm→ Picture → Picture Options →Auto Adjustment t Picture Reset OK / CancelSetting up the TV with Your PC SRS TruSurround HD Off / On t ScreenEqualizer SRS TruDialog Off / OnMulti-Track Sound MTS t Auto Volume Off / Normal / NightSound Reset OK / Cancel Speaker Select External Speaker / TV SpeakerSecurity Setting the On / Off TimerTimer Locking ProgramsMenu Language CaptionNetwork GeneralSelf Diagnosis PIP tLegal Notice Picture In Picture PIPBy Online Upgrade the software using the Internet Software UpgradeSoftware Upgrade HD Connection GuideModem Port on the Wall Connecting to a Wired NetworkNetwork Connection LAN Port on the WallNetwork Setup Manual Network Setup AutoNetwork Setup Advanced Connecting to a Wireless NetworkBelow Network Setup PBC WPS Network Setup Ad-Hoc Security Key Entered ~9 NumberNetwork Setup Manual Connecting to your PC through a network Connecting a USB DeviceMedia Play Advanced Features Screen Display Sorting standard is different depending on the contentsVideos Name File extension FormatYy Supported Video Formats Music Playing Multiple Files List section using the Green buttonPhotos Media Play Additional FunctionsSettings Same file name as the video AudioHome Theater Anynet+ Anynet+Device TV Rear Panel Switching between Anynet+ Devices Setting Up Anynet+Recording Troubleshooting for Anynet+ Listening through a ReceiverMessage / Media / ScreenShare SetupSetting Up AllShare About AllShareMy Mobile Other Information Assembling the CablesInstalling the Wall Mount Blanking BracketAnti-theft Kensington Lock TV-Holder Kit Sold Separately Installing the TV-HolderSecuring the TV to the Wall TV-Holder BN96-15753AIssues Solutions and Explanations Troubleshooting05InformationOher English Make sure your connected devices are powered on On, refer to ‘Remote control does not work’ belowThere is no signal Make sure the Network Connection is set to Wireless pCaption must be activated on the external device p Storage and MaintenanceDegree connectors Every time the TV is turned offLicense Specifications Dimensions Index Favorite Channel Film Mode Fine Tune Flesh Tone FrequencyAllShare Amplify Antenna Anynet+ This page is intentionally Left blank