Samsung BN68-03092A-02, LED-C9000 user manual Troubleshooting

Troubleshooting

The remote control signal type icon of the Touch Control has changed even though I didn't change the setting.

The screen on the Touch Control turns off continuously.

The arrow on the top right does not disappear.

The touch-screen function doesn't work.

I want to turn off the power.

If the remote control signal type is set to WiFi (auto) in Settings, the icon may change from time to time depending on the condition of network or TV connection.

The automatic screen turn off mode operates automatically to extend the life cycle of batteries. The automatic screen turn off time setting can be changed by selecting Settings, Remote Settings, General Settings and Backlight Duration. The time can be extended to a maximum of 3 minutes. (You can select 1 minute, 2 minutes or 3 minutes.)

Upgraded software has been added on Samsung. com. Access Settings and perform a software upgrade to upgrade the software to the latest version.

The capacitor type touch-sensor technology of the remote does not respond to the touch of a fingermail or stylus. Touch the screen lightly with your finger. The corresponding function will start with a beep.

To turn off the power of or reboot the remote, slide up and remove the cover on the back of the remote, insert the batteries again and close the cover.

Touch Control

24