Samsung LED-C9000 First Time User Setup, Select the desired language, and then tap OK, Welcome

First Time User Setup

The default setup screen appears when your Touch Control is turned on for the first time. To connect the Touch Control to the TV, you must complete the following steps.

1Select the desired language, and then tap <OK>.

2Select <OK> to connect the Touch Control. If you want to connect to it later or if you have changed the Touch Control to a new one, select <Skip>. If you selected <Skip>, refer to “Setting up the Network” (p. 6) when you want to connect the TV and Touch Control.

•The Samsung Wireless LAN Adapter must be connected to the TV before you establish a connection.

•The Samsung Wireless LAN Adapter and Touch Control must be parallel and no farther than 8 inches (20cm) apart.

•If you are failed, reconnect the Samsung Wireless LAN Adapter, and then try again.

•For initial TV settings, refer to the TV manual.

Plug & Play

Select Language of the OSD.

Menu Language : English

Welcome

Select a Language.

Language

English

OK

Connect TV

Succeed!

Complete the configuration of

this remote control.

Do the TV configuration following the TV screen information.

OK
Keyboard
TV Control	Services

Touch Control

Enter

5