Samsung UN55C5000 user manual Listening through a Receiver, Troubleshooting for Anynet+

Page 41

¦¦ Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.

1.Select Receiver and set to On.

2.Press the EXIT button to exit.

xx If your receiver supports audio only, it may not appear in the device list.

xx The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

xx When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.

NOTE

xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.

xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. xx The Anynet+ functions do not operate with other manufacturers’ products.

¦¦ Troubleshooting for Anynet+

Problem

Possible Solution

 

 

Anynet+ does not work.

• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

 

• Only one receiver (home theater) can be connected.

 

• Check if the Anynet+ device power cord is properly connected.

 

• Check the Anynet+ device’s Video/Audio/HDMI cable connections.

 

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

 

• Check whether the TV remote control is in TV mode.

 

• Check whether the remote control is Anynet+ compatible.

 

• Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (initial

 

setup), etc.)

 

• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off

 

and on again.

 

• Check if the Anynet+ Function of Anynet+ device is set on.

 

 

I want to start Anynet+.

• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to

 

On in the Anynet+ Setup menu.

 

• Press the TOOLS button to display the Anynet+ menu and select a menu you want.

I want to exit Anynet+.

• Select View TV in the Anynet+ menu.

 

• Press the SOURCE button on the TV remote control and select a non- Anynet+ device.

 

• Press z, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates

 

only when a tuner-embedded Anynet+ device is not connected.)

The message “Connecting to

• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.

Anynet+ device...” appears on the

• Use the remote control when the Anynet+ setting or switching to view mode is complete.

screen.

 

 

 

The Anynet+ device does not play.

• You cannot use the play function when Plug & Play (initial setup) is in progress.

 

 

The connected device is not

• Check whether or not the device supports Anynet+ functions.

displayed.

• Check whether or not the HDMI cable is properly connected.

 

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

 

• Search Anynet+ devices again.

 

• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+

 

functions.

 

• If connection is terminated because there has been a power interruption or the HDMI cable has been

 

disconnected, please repeat the device scan.

The TV Program cannot be

• Check whether the antenna jack on the recording device is properly connected.

recorded.

 

 

 

The TV sound is not output

• Connect the optical cable between TV and the receiver.

through the receiver.

 

 

 

04 Advanced Features

English 41

[UC5000(55)_USA]BN68-03004A-01Eng.indb 41

2010-06-28 오후 1:06:55

Image 41
Contents Samsung Electronics America, Inc Challenger Samsung Electronics Canada Inc., Customer ServiceInstallation with a stand Securing the Installation SpaceInstallation with a wall-mount Still image warningContents Accessories List of FeaturesCleaning Cloth BN63-01798B Component Composite AV Coaxial RFSee separate guide for installing the stand Install the StandStand 1EA Follow the steps below to connect the TV to the standSpeakers Remote control sensor Buttons on the remote controlViewing the Control Panel Product color and shape may vary depending on the modelStarted Viewing the Remote ControlPlug & Play Initial Setup Connecting to an AntennaPower Input VHF/UHF AntennaConnections Connecting to an AV DeviceDigital Audio OUT Optical Connecting to an Audio DeviceUsing an HDMI/DVI Cable or a D-sub Cable Connecting to a PCMode Resolution Horizontal Frequency Vertical Frequency Sync PolaritySource List How to Navigate MenusEdit Name Changing the Input SourceAdd to Favorite / Delete from Favorite Channel ListAntenna Air / Cable t Auto ProgramClear Scrambled Channel Other FeaturesProgrammed Editing ChannelsEco Solution Mode tAdvanced Settings Fine TunePicture Options Picture OptionsOff Turns the Expert Pattern function off OO MENUm→ Picture → Picture Options →Auto Adjustment t Picture Reset OK / CancelSetting up the TV with Your PC ScreenSRS TruSurround HD Off / On t Auto Volume Off / Normal / NightSRS TruDialog Off / On SRS TheaterSound tSpeaker Select External Speaker / TV Speaker Sound Reset OK / CancelSpdif Output TimeTo be played when the TV is turned on automatically. Note TimerOO MENUm → Setup → Security → Entere SecurityCaption Menu LanguageGeneral Legal Notice PIP tSelf Diagnosis Picture In Picture PIPSoftware Upgrade Software UpgradeHD Connection Guide Contact SamsungNetwork Connection Connecting to a Wired NetworkModem Port on the Wall LAN Port on the WallNetwork Setup Manual Network Setup AutoNetwork Setup Network Type Wired Network Setup Network TestConnecting to a Wireless Network Boot up Network Setup Samsung Auto ConfigurationHow to set up automatically Network Setup PBC WPSThen press the ENTEREbutton. Press the or Displays a list of the available networksNetwork Setup Ad-Hoc To connect SWL Samsung Wireless LinkSWL connect Connecting to your PC through a network Connecting a USB DeviceMedia Play USB Mass Storage Class MSC deviceUC500055USABN68-03004A-01Eng.indb 2010-06-28 오후 Screen Display VideosBut you cannot play the Game itself Yy Supported Subtitle FormatsYy Supported Video Formats Advanced Features EnglishMusic Photos List section using the Green buttonPlaying Multiple Files Media Play Additional FunctionsSame file name as the video Audio SettingsTo connect to a Sam sung Home Theater Features What is Anynet+? t AdvancedAnynet+ Home Theater Anynet+Recording Setting Up Anynet+Switching between Anynet+ Devices Listening through a Receiver Troubleshooting for Anynet+Setting Up AllShare SetupMessage / Media / ScreenShare About AllShareMy Mobile Assembling the Cables Other InformationBlanking Bracket Installing the Wall MountAnti-theft Kensington Lock TV-Holder Kit Sold Separately Securing the TV to the WallTV-Holder BN96-15753A Screw M8 x L19Issues Solutions and Explanations TroubleshootingThere is no signal On, refer to ‘Remote control does not work’ belowMake sure your connected devices are powered on Make sure the Network Connection is set to Wireless pCaption must be activated on the external device p Degree connectorsEvery time the TV is turned off Check the cable connections and reconnect themLicense Specifications Unit inches DimensionsFront view / Side view AllShare Amplify Antenna Anynet+ Favorite Channel Film Mode Fine Tune Flesh Tone FrequencyIndex