Samsung BN68-03114B-01 Others, Component cable connection Connection, Contents, Brightness lower

Other Information

Issues

Solutions and Explanations

Others

Purple/green rolling horizontal bars and	• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates
buzzing noise from the TV speakers with	that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI
Component cable connection.	connection.
The picture won’t display in full screen.	• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
	contents.
	• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your
	TV.
	• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.	• Replace the remote control batteries with the poles (+/–) in the right direction.
	• Clean the sensor’s transmission window on the remote.
	• Try pointing the remote directly at the TV from 5~6 feet away.
The TV is making a humming noise.	• Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges
	that are used to create the images on the screen.
	• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the
	brightness lower.
	• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard
	surface. Also try rerouting your connection cables.
	• Improper installation of wall mount can create excessive noise.
Image Retention (Burn In) Issue.	• To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.
	Pixel Shift technology enables you to set picture movement up/down (Vertical Line) and side to side
	(Horizontal Dot).
The cable/set top box remote control	• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the
doesn’t turn the TV on or off, or adjust the	SAMSUNG TV code.
volume.
A “Mode Not Supported” message	• Check the supported resolution of the TV, and adjust the external device’s output resolution
appears.	accordingly. Refer to the resolution settings on page 11 of this manual.
Caption on TV menu is greyed out.	• Caption can not be selected in the TV menu when connected via HDMI or Component (p. 24).
	• Caption must be activated on the external device (p. 24).
There is a plastic smell from the TV.	• This smell is normal and will dissipate over time.
The TV Signal Information is unavailable	• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 25).
in the Self Diagnostic Test menu.
The TV is tilted to the side.	• Remove the base stand from the TV and reassemble it.
The channel menu is greyed out	• The Channel menu is only available when the TV source is selected.
(unavailable).
Your settings are lost after 30 minutes or	• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
every time the TV is turned off.	the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
	SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play → ENTERE(p. 8).
You have intermittent loss of audio or	• Check the cable connections and reconnect them.
video.	• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
	flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
	degree connectors.
You see small particles when you look	• This is part of the product’s design and is not a defect.
closely at the edge of the frame of the TV.
POP (TV’s internal banner ad) appears on	• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).
the screen.

✎✎Some of above pictures and functions are available at specific models only.

42 English

[PC490-Canada]BN68-03114B-00L02.indb 42

2010-07-02 오후 1:03:40