Samsung UN46ES6580 Setting up Universal Remote with Code, Using your remote as a Universal Remote

Setting up Universal Remote with

Universal

Remote

Code

Set

If your remote controller buttons does not work, button.

please set

your

re

mote

to

1V

mode

by using the

DEVICE

1.

To set up Universal Remote, the top of your remote blink

press twice

the SETUP button simulaneously.

on your remote for 3 seconds.

All

the

LEOs

on

2. 3.

Press the 1 button on your remote to select a Set-top Press the number button corresponding to the port of ~ Port numbers are as follows:

box. device connected.

HDMI1/DVI

4. ~

Enter Universal Remote Code

For more detailed information on page 21.

corresponding to device about Universal Remote

you have. Code, refer to "Universal Remote Code Set list"

Using your remote as a Universal Remote

In Universal Remote mode, you can use your remote to control your 1V and STB together, your 1V alone, or your STB alone. When you have set your remote to control your 1V and STB, certain buttons control the 1V only and certain buttons control the STB only.

•

Controlling the TV and STB Together

To control your 1V and STB together, press the WATCH TV button at the top center of your remote. The 1V and STB LEOs go on and off. If the 1V is on, it automatically changes to the source the STB is connected to.

You can control the 1V and Set-Top box using the universal remote. (For example, press the Volume button to adjust the 1V volume, press the channel button to change the STB channels, etc.)

~ See the illustration to the right. When you are using the remote as a universal remote, the buttons demarcated for TV control the TV only and the buttons demarcated for STB control the set top box only.

~ To turn only the TV off, press the DEVICE button, change to TV mode, and then press the C) button. To turn only the STB off, press the DEVICE button, change to STB mode, and then press the C) button. To turn the TV and the STB off, press the C) button and hold it for two seconds.

•

Controlling the TV only.

Press the DEVICE button and change to 1V mode. The 1V LED goes on and off. You can only control the 1V using the universal remote.

• Controlling the STB only

Press the DEVICE control the Set-Top

button and change to STB mode. The STB box using the universal remote.

LED

goes on and off. You can only