1.Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.
Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV IN
2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the Monitor.
3.Select AV that is connected to a Camcorder using the Source button on the monitor's front or remote control.
4.Then, start the Camcorders with a tape inserted.
The
If your camcorder is stereo, you need to connect a set of two cables.
5. Connecting DTV Set Top Box
The connections for a typical Set Top Box are shown below.
1.Connect a set of audio cables between the COMPONENT AUDIO IN
2.Connect a Component cable between the BNC/COMPONENT IN - PR, Y, PB port on the Monitor and the PR, Y, PB jacks on the Set Top Box.
3.Select Component that is connected to a DTV Set Top Box using the Source button on the monitor's front or remote control.
For an explanation of Component video, see your Set Top Box owner's manual.
6.Connecting Speakers
1.Tighten the SET and the speaker using the screws.