Video signal. (Off/On)
More than one PIP couldn't be overlapped on screen as BNC and the component use the same terminal.
1) PIP
-The direct button on the remote control is 'PIP' button.
•Off/On
:Turn the PIP Screen on or off.
2)Source
-The direct button on the remote control is 'SOURCE' button.
• PC / DVI
: AV /
• BNC
: AV /
• AV / S-Video
: PC / BNC / DVI Mode
• Component
:PC / DVI Mode
:Select the input source for the PIP.
3)Swap
-The direct button on the remote control is 'SWAP' button.
:Swapping the contents of the PIP and main image.
The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window.
4) Size
- The direct button on the remote control is 'SIZE' button.
: Change the Size of the PIP window.
If you select , , in Size, Position and Transparency will not be activated.
5)Position
:Change the Position of the PIP window.
6)Transparency
• High / Medium / Low / Opaque
:Adjust the Transparency of PIP windows.
Available Mode : PIP
Edit Name Name the input device connected to the input jacks to make your input source selection easier.
MagicNet couldn't be renamed.
•PC
•BNC
•DVI
•AV
•
•Component
1)PIP
2)Source
3)Swap
4)Size
5)Position
6)Transparency
Picture
PC / BNC /DVI Mode