Samsung LTM 225W Installing Vesa compliant mounting devices, Refer to page A.3 to remove the base

Page 68

11.APPENDIX_EN 2/5/03 12:36 AM Page 2

A P P E N D I X

Installing VESA compliant mounting devices

Refer to page A.3 to remove the base.

Rear cover

Mounting pad

Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases.

Wall Mount Instructions

The following instructions apply to a hollow sheet-rock wall only. Tools/Hardware needed - Philips screwdriver, four toggle bolts, 5/8in dia. Drill bit and drill. Contact Ergotron at (800) 888-8458 to purchase the triple pivot direct mount adapter and wall mount bracket kit.

•LTM225W (22") : No. 47 - 007 - 099 - 02 (Pivot direct mount adapter) No. 97 - 101 - 003 - 00 (Wall mount bracket kit)

Align the wall mount bracket on the wall at the desired height, making sure that the bracket will be mounted between the wall studs. Mark the four corner openings and drill four 5/8-dia. holes.

Assemble the wall mount kit according to the instructions provided with it. Securely attach Ergotron’s flat panel, triple pivot direct mount adapter to the back of the TV using the four 4mm, .7 pitch x 10mm screws provided with the arm. Secure the assembly to the wall using four 3/16 by 3-inch long toggle bolts.

Installation Notes

1.This monitor is designed for vertical wall surface installation only.

2.To protect your monitor from malfunction, please avoid installing near the following:

-Sprinkler sensor

-Any likely source of vibration or shock

-High-voltage cables

-Heat source

-High-humidity area

3.Always install using the proper method for your specific installation.

-i.g. For concrete wall installation, use concrete-specific nails.

4.Do not build monitor into wall.

A.2 APPENDIX

Image 68

Contents Owner’s Instructions Inside Front Coveren 2/4/03 1144 PM Thank You for Choosing Samsung Prefaceen 2/4/03 1144 PM Prefaceen 2/4/03 1144 PM FCC Information Operation InstallationYour New TV PC Display Special FeaturesTroubleshooting List of Features List of PartsFamiliarizing Yourself with The TV Rear Panel Jacks VIDEO/AUDIO in jackSuper Video in jack Headphone jackRemote Control Frequently Used ButtonsVOL +, VOL Number buttonsMenu adjustment and Video or DVD adjustment button Convenient Buttons +100PIP controls Multichannel Television StereoConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsS TA L L AT I O N Connecting a VCR Connecting an S-VHS VCR Connecting a DVD Player Connecting a Digital TV Set-Top BoxConnecting a PC SUBConnecting to a Sub-woofer Installing Batteries in the Remote ControlPlug & Play Feature Turning the TV On and OffIf you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Using the Channel Buttons Directly Accessing ChannelsUsing the Pre-CH Button to select the Previous Channel Changing ChannelsAdjusting the Volume Using MuteSetting the Clock UP/DOWNCustomizing the Picture Using Automatic Picture Settings Alternate methodCustomizing the Sound Using Automatic Sound Settings Viewing a VCR or Camcorder Tape Setting Up Your Remote Control Chapter FourSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your DVD Remote Control Codes Fine Tuning Channels LNA Low Noise Amplifier Setting the Blue Screen Mode Changing the Screen Size Freezing the PictureSpecial Sound Options Choosing a Multi-Channel Sound MTS SoundtrackAuto Volume Virtual Dolby Adjusting the Headphone Sound You can select either Main or Sub when PIP is On Selecting the SoundSetting the On/Off Timer What is Absent Power Off? Viewing Closed Captions LEFT/RIGHT buttons to select Caption or TextActivating Picture-in-Picture PIP SettingsViewing Picture-in-Picture Selecting a Signal Source External A/V for PIP Swapping the Contents of the PIP image and Main imageChanging the PIP Channel Changing the Location of the PIP WindowUsing the V-Chip Setting Up Your Personal ID Number PINHow to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesTV-Y E C I a L F E AT U R E S NC-17No children under age Adults only NR Not rated Using Your TV as a Computer PC Display How to Set up Your PC Software Windows onlyAdjusting the Screen Quality Adjusting CoarseChanging the Screen Position Changing the Screen Color Standard To Return the Custom settings back to the default position Adjusting the Screen Color SettingsIdentifying Problems Chapter SixProblem Possible Solution Clock Sync Polarity Mode Resolution Frequency KHz MHz Display ModesInstalling Vesa compliant mounting devices Refer to page A.3 to remove the baseMaintenance of Your LCD TV Attaching a Wall or Arm mounting deviceUsing the Anti-Theft Kensington Lock OptionalPin Assignments Cleaning and Maintaining Your TVUsing Your TV in Another Country Specifications LTM225W