Turning the TV On and Off
Press the POWERP button on the remote control. You can also use the POWERPbutton on the TV.
Viewing the Menus
With the power on, press the MENU button.
1 The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Support.
Press the ▲ or ▼ button to select one of the icons.
2 Then press the ENTEREbutton to access the icon’s
➣The
Storing Channels in Memory (Automatic Method)
| Press the MENU button to display the menu. | |
1 | ||
Press the ▲ or ▼ button to select “Channel”, then | ||
| press the ENTEREbutton. | |
| ||
| Press the ▲ or ▼ button to select “Auto Program”, | |
2 | ||
then press the ENTEREbutton. | ||
| Press the ▲ or ▼ button to select the antenna | |
3 | ||
connection, then press the ENTEREbutton. |
Auto Program
Select the Antenna source to memorize.
Air | Start |
Cable | Start |
Auto | Start |
UMove | EEnter mSkip |
| When selecting the Cable TV system: Press the | |
4 | ||
ENTEREbutton to start the auto program. | ||
| Press the ▲,▼, ◄ or ► to select the correct analog | |
| ||
| signal cable system source among “STD”, “HRC”, | |
| and “IRC”. Press the ▲ or ▼ button to select “Start”, | |
| then press the ENTEREbutton. If you have Digital | |
| cable TV, select the cable system signal source for | |
| both Analog and Digital. |
Auto Program
Selects the cable system.
Analog | STD | HRC | IRC |
Digital | STD | HRC | IRC |
|
| Start |
|
|
| UMove EEnter | mSkip |
5 | The TV begins memorizing all available stations. | |||
Press the EXIT button to exit. |
| |||
|
| Auto Program |
|
|
| Auto Program in Progress. |
|
| |
| DTV Cable : 12 | Cable : 32 |
| Cable 38 |
|
|
|
| 50% |
|
| Stop |
|
|
|
|
| EEnter | mSkip |
|
| Auto Program |
|
|
| Removing scrambled channel. |
|
| |
| DTV Cable : 16 | Cable : 45 | DTV Cable 41 | |
|
|
|
| 77% |
|
| Stop |
|
|
|
|
| EEnter | mSkip |
➣After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is being executed. You can also press the ENTEREbutton to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory will be selected (in order).
Selecting the antennas
•Air: “Air” antenna signal.
•Cable: “Cable” antenna signal.
•Auto: “Air” and “Cable” antenna signals.