Samsung LN9A45CD, LN9A450CD, LN22A45CD, LN22A450CD manual Connecting a VCR

Connecting a VCR

Video Connection

TV Rear Panel

VCR Rear Panel

5	Audio Cable (Not supplied)
4	Video Cable (Not supplied)
3	RF Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

	Unplug the cable or antenna
1
	from the back of the TV.
	Connect the cable or antenna
2
	to the ANT IN terminal on the
	back of the VCR.
	Connect an RF Cable between
3
	the ANT OUT terminal on the
	VCR and the ANT IN terminal
	on the TV.
	Connect a Video Cable between
4
	the VIDEO OUT jack on the
	VCR and the AV IN [VIDEO] jack

on the TV.

Connect Audio Cables between

5 the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L] jacks on the TV.

➣If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

S-Video Connection

TV Rear Panel

VCR Rear Panel

3	Audio Cable (Not supplied)
2	S-Video Cable (Not supplied)
1	RF Cable (Not supplied)

	To begin, follow steps 1–3 in
1
	the previous section to connect
	the antenna or cable to your
	VCR and your TV.
	Connect an S-Video Cable
2
	between the S-VIDEO OUT jack
	on the VCR and the AV IN
	[S-VIDEO] jack on the TV.
3	Connect Audio Cables between
	the AUDIO OUT jacks on the

VCR and the AV IN [R-AUDIO-L] jacks on the TV.

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

English-