Samsung LT-P266W manual Selecting a Signal Source External A/V for PIP, Changing the PIP Channel

SP E C I A L FE AT U R E S

Selecting a Signal Source (External A/V) for PIP

3

Press the UP/DOWN buttons to select “Source”,then press the

ENTER button.

Select a source of the sub picture by pressing the UP/DOWN buttons and press the ENTER button.

Note : Source selection is possible only when Component 1,

Component 2, DVI, or PC is connected.

Swapping the Contents of the PIP and Main image

4

Press the UP/DOWN buttons to select “Swap”, then press the ENTER button.

Changing the PIP Channel

5

Press the UP/DOWN	buttons
to select “Channel”, then press
the ENTER button.
Press the UP/DOWN	buttons

to select the desired channel in the PIP window.

Changing the Position of the PIP Window

6

Press the UP/DOWN buttons to select “Position”, then press the ENTER button.

Press the UP/DOWN buttons

to select the desired PIP window position.

MAIN:PC, DVI, Component 1 or 2,

PIP:TV

“Channel” is inactive and not available in TV mode. However, they become active and available

in PC, DVI, Component 1 and 2 modes. When main picture is set to TV/AV/ S-Video, only Component1/Component2/ DVI/PC can be selected and when main picture is set to Component1/ Component2/DVI/PC, only TV/AV/ S-Video can be selected.

Changing the Size of the PIP Window

7

Press the UP/DOWN buttons to select “Size”, then press the ENTER button.

Press the EXIT button to exit.

Press the UP/DOWN buttons to select the desired size of the

PIP window.

Press the EXIT button to exit.

•When the PC is in energy saving mode, you cannot choose the PIP option.

•You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

•You can adjust picture position only by using the size menu.

English-35