SP E C I A L FE AT U R E S
Detail Control
1
Press the MENU button to display the menu.
Press the UP/DOWN buttons to select “Picture”, then press the ENTER button.
Press the UP/DOWN buttons to select
“My Color Control”, then press the ENTER button.
2
Press the UP/DOWN buttons to select “Detail Control”, then press the ENTER button.
3
Press the UP/DOWN buttons to select the desired My Color Control color and press the ENTER button.
(To reset the “Detail Control”, select “Reset” by pressing
the UP/DOWN button and then press the ENTER button.)
Press the LEFT/RIGHT buttons to increase or decrease the value of a particular item.
Press the EXIT button to exit.
*The source are displayed in the following order: Pink - Green - Blue - Reset
You can adjust Pink, Blue and Green without using the predefined settings in custom mode.
This function doesn’t work when the Source in PC mode, DNIe is set to off or PIP is set to on.