Samsung LN40C630, LN60C630 Connecting to an Antenna, Plug & Play Initial Setup, Or Home Use

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Connecting the mains and antenna.

VHF/UHF Antenna

orCable

ANT OUT

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

✎✎To return to the previous step, press the red button.

Started01 Getting

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the

volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.

✎✎In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTEREbutton.

The channel search will start automatically.

For more information, refer to Channel → Auto Program. (P. 12)

✎✎Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

✎✎If you select the Auto, set the daylight saving time. Select the time zone which you live.

The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

OO MENUm→ Setup → Plug & Play → ENTERE

Setup