Samsung LN26C450, LN32C450 user manual Source List, Edit Name, Changing the Input source, Ex-Link

Connections

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360x768@60Hz.

Mode	Resolution	Horizontal Frequency	Vertical Frequency (Hz)	Pixel Clock Frequency	Sync Polarity (H/V)
		(kHz)		(MHz)
IBM	640 x 350	31.469	70.086	25.175	+ / -
	720 x 400	31.469	70.087	28.322	- / +
MAC	640 x 480	35.000	66.667	30.240	- / -
	832 x 624	49.726	74.551	57.284	- / -
		31.469	59.940	25.175	- / -
	640 x 480	37.861	72.809	31.500	- / -
		37.500	75.000	31.500	- / -
		37.879	60.317	40.000	+ / +
	800 x 600	48.077	72.188	50.000	+ / +
VESA DMT		46.875	75.000	49.500	+ / +
		48.363	60.004	65.000	- / -
	1024 x 768	56.476	70.069	75.000	- / -
		60.023	75.029	78.750	+ / +
	1280 x 720	45.000	60.000	74.250	+ / +
	1360 x 768	47.712	60.015	85.500	+ / +
VESA CVT	720 x 576	35.910	59.950	32.750	- / +
	1280 x 720	56.456	74.777	95.750	- / +
VESA GTF	1280 x 720	52.500	70.000	89.040	- / +

✎✎NOTE

xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.

xx The set might operate abnormally if a non-standard video format is selected.

xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

EX-LINK

Connector for service only.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

Changing the Input source

Source List

OO MENUm→ Input → Source List → ENTERE

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

■■ TV / AV / Component1 / Component2 / PC / HDMI1/DVI / HDMI2 / HDMI3 / USB

✎✎ You can only choose external

devices that are connected to the TV. In the Source List, connected inputs will be highlighted.

✎✎ PC always stay activated. 10 English

Edit Name

OO MENUm→ Input → Edit Name → ENTERE

■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

✎✎ When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode under Edit Name.