Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

✎✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

1. Drive the screws into the clamps and firmly fasten them onto the wall. Make sure the screws are firmly fixed into the wall.

✎✎Screw Specifications

▪▪ For a 17 ~ 29 Inches LCD TV: M4

▪▪ For a 32 ~ 40 Inches LCD TV: M6

2.Remove the screws from the back center of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

3.Connect the clamps fixed onto the TV and the clamps fixed onto

the wall with a strong cable and then tie the string tightly.

✎✎Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt	Wall
about the security of your connections, contact a professional
installer.

✎✎Install the TV near to the wall so that it does not fall backwards.

✎✎It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. Untie the string before moving the TV.

Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use.

05 Other Information

✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.

To lock the product, follow these steps:

1.Wrap the Kensington lock cable around a large, stationary object such as desk or chair.

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.

3.Insert the locking device into the Kensington slot on the product (1).

4.Lock the lock.

✎✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.

✎✎The locking device has to be purchased separately.

✎✎The location of the Kensington slot may be different depending on the TV model.

English 33