Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode | Resolution | Horizontal Frequency | Vertical Frequency | Pixel Clock Frequency | Sync Polarity | |
(KHz) | (Hz) | (MHz) | (H / V) | |||
|
| |||||
IBM | 640 x 350 | 31.469 | 70.086 | 25.175 | +/- | |
| 720 x 400 | 31.469 | 70.087 | 28.322 | ||
MAC | 640 x 480 | 35.000 | 66.667 | 30.240 | ||
| 832 x 624 | 49.726 | 74.551 | 57.284 | ||
VESA CVT | 720 x 576 | 35.910 | 59.950 | 32.750 | ||
| 1280 x 720 | 44.772 | 59.855 | 74.500 | ||
| 1280 x 720 | 56.456 | 74.777 | 95.750 | ||
VESA DMT | 640 x 480 | 31.469 | 59.940 | 25.175 | ||
| 640 x 480 | 37.500 | 75.000 | 31.500 | ||
| 640 x 480 | 37.861 | 72.809 | 31.500 | ||
| 800 x 600 | 37.879 | 60.317 | 40.000 | +/+ | |
| 800 x 600 | 46.875 | 75.000 | 49.500 | +/+ | |
| 800 x 600 | 48.077 | 72.188 | 50.000 | +/+ | |
| 1024 x 768 | 48.363 | 60.004 | 65.000 | ||
| 1024 x 768 | 56.476 | 70.069 | 75.000 | ||
| 1024 x 768 | 60.023 | 75.029 | 78.750 | +/+ | |
| 1360 x 768 | 47.712 | 60.015 | 85.500 | +/+ | |
VESA GTF | 1280 x 720 | 52.500 | 70.000 | 89.040 |
NWhen using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
¦Setting up the TV with your PC
NPreset: Press the SOURCE button to select PC mode.
❑Auto Adjustment
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically
TPress the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.
NThis function does not work in
Picture
Brightness | : 45 |
Sharpness | : 50 |
Auto Adjustment | ► |
Screen
Advanced Settings
Picture Options
Picture Reset
❑Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the
Image Reset
You can replace all image settings with the factory default values.
English - 21