Connecting a VCR
Video Connection
TV Rear Panel
1 | Unplug the cable or antenna |
from the back of the TV. |
TV Side Panel |
| 2 | Connect the cable or antenna |
|
| to the ANT IN terminal on the | |
| VCR Rear Panel |
| back of the VCR. |
|
| 3 | Connect an RF Cable between |
|
| the ANT OUT terminal on the | |
|
| VCR and the ANT IN terminal | |
|
|
| on the TV. |
|
| 4 | Connect a Video Cable |
|
| between the VIDEO OUT jack | |
|
| on the VCR and the AV IN 1 | |
|
|
| [Y/VIDEO] or AV IN 2 [VIDEO] |
| RF Cable |
| jack on the TV. |
| 3 (Not supplied) |
| |
|
| 5 | Connect Audio Cables between |
5 | Audio Cable | the AUDIO OUT jacks on the | |
(Not supplied) |
| VCR and the AV IN 1 (or AV IN 2) | |
|
|
| |
4 | Video Cable | ➣ If you have a “mono” | |
(Not supplied) |
| VCR, use a | |
|
|
| supplied) to hook up to the right |
|
|
| and left audio input jacks of the |
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. |
| TV. If your VCR is stereo, you | |
| must connect two cables. | ||
➣Each VCR has a different back panel configuration.
➣When connecting a VCR, match the color of the connection terminal to the cable.
➣When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
S-Video Connection
TV Side Panel | TV Rear Panel |
VCR Rear Panel
1 | RF Cable |
(Not supplied) |
2 Audio Cable (Not supplied)
3
| To begin, follow steps | |
1 | ||
the previous section to connect | ||
the antenna or cable to your | ||
| ||
| VCR and your TV. | |
| Connect Audio Cables between | |
2 | ||
the AUDIO OUT jacks on the | ||
VCR and the AV IN 2 | ||
| ||
| ||
3 | Connect an | |
between the |
on the VCR and the AV IN 2
An
➣Each VCR has a different back panel configuration.
➣When connecting a VCR, match the color of the connection terminal to the cable.