Samsung LN40A450C1D, LN32A450C1D, LN26A450C1D, LN37A450C1D manual Connecting a VCR

Connecting a VCR

Video Connection

TV Side Panel TV Rear Panel

VCR Rear Panel

	Unplug the cable or antenna
1
	from the back of the TV.
	Connect the cable or antenna
2
	to the ANT IN terminal on the
	back of the VCR.
	Connect an RF Cable between
3
	the ANT OUT terminal on the
	VCR and the ANT IN terminal

on the TV.

4	Connect a Video Cable
	between the VIDEO OUT jack
	on the VCR and the AV IN 1
	[Y/VIDEO] or AV IN 2 [VIDEO]
3 RF Cable (Not supplied)	jack on the TV.
	Connect Audio Cables between
5
	the AUDIO OUT jacks on the
	VCR and the AV IN 1 (or AV IN 2)
5 Audio Cable (Not supplied)	[R-AUDIO-L] jacks on the TV.

			➣ If you have a “mono” (non-stereo)
	4	Video Cable (Not supplied)	VCR, use a Y-connector (not
			supplied) to hook up to the right
			and left audio input jacks of the
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.			TV. If your VCR is stereo, you
			must connect two cables.

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

➣When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

S-Video Connection

TV Side Panel TV Rear Panel

VCR Rear Panel

To begin, follow steps 1–3 in

1 the previous section to connect the antenna or cable to your VCR and your TV.

Connect Audio Cables between

2 the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV.

	3	Connect an S-Video Cable
		between the S-VIDEO OUT jack
		on the VCR and the AV IN 2
		[S-VIDEO] jack on the TV.
	An S-Video cable may be included
1 RF Cable (Not supplied)	with a VCR. (If not, check your local
	electronics store.)

2

3

Audio Cable (Not supplied)

S-Video Cable (Not supplied)

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

English-