Samsung LE26A457 user manual Scanning and Switching between Anynet+ Devices

Scanning and Switching between Anynet+ Devices

1.Press the TOOLS button. Then press the ENTER button to

	select "Anynet+(HDMI-CEC)".	TV	P9
2. Press the ▲ or ▼ button to select "Select Device", then press		View TV
	the ENTER button.	Select Device		
3.	Press the ▲ or ▼ button to select to a particular device and	Record		
	press the ENTER button. It is switched to the selected	Menu on Device		
		Device Operation		
	device.
4.		Receiver :Off		
	If you cannot find a device you want, press the ▲ or ▼ button
		Setup		
	to select "Setup", then press the ENTER button.
		Move	EnterEnterReturn
5. Press the ▲ or ▼ button to select "Searching Connections",
		Return
	then press the ENTER button.
	The message "Configuring Anynet+ connection..." is displayed.		Setup
	When searching devices completes, the connected devices are	Anynet+ (HDMI-CEC)		:	On	
	listed in the Anynet+ menu.	Auto Turn Off		:	Yes	
➣ Switching to the selected devices may take up to 2 minutes.
	You cannot cancel the operation during the switching operation.	Searching Connections				
➣ The time required to scan for devices is determined by the
	number of connected devices.	Move	Enter			Return
➣ When the device scan is complete, the number of found
	devices is not displayed.
➣ Although the TV automatically scans devices when it is turned on using the POWER button, devices
	connected when the TV is on or under a specific circumstance are not displayed in the device list.
	Therefore select "Searching Connections" menu to search devices.
➣ If you have selected external input mode by pressing the SOURCE button, you cannot use the
	Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.

English - 48