Samsung LE26A457 user manual Recording, Listening through a Receiver, See

Page 52

Recording

You can make a recording of a TV programme using a recorder.

Press the button.

Recording begins. (Only when the Anynet+ enabled recording device is connected.)

The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded.

You can also record the source streams by selecting "Record" after pressing the TOOLS button.

Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual.

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.

1.Press The TOOLS button. Then Press the ENTER button

to select "Anynet+(HDMI-CEC)".

TV

P9

 

 

Press the ▲ or ▼ button to select "Receiver", then press the

 

View TV

 

 

ENTER

button.

 

Select Device

2. Press the ◄ or ► button to select to "On", then press the

 

Record

 

ENTER

button.

 

Menu on Device

Now you can listen to sound through the receiver.

 

Device Operation

3. Press the EXIT button to exit.

 

Receiver

:Off

When the receiver is set to On, you can listen to the TV sound

 

Setup

Enter

through the 2-channel receiver.

 

Move

 

 

Return

 

 

If the receiver is exclusively for a home theatre only

 

 

 

 

 

 

 

(supporting audio only), it may not appear in the device list.

 

 

 

 

Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.

In case of a content with copyright problem, listening through the receiver may not properly operate.

If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.

(see page 22)

English - 50

Image 52
Contents LCD TV Still image may cause permanent damage to the TV screen Precautions When Displaying a Still ImageContact Samsung Worldwide Contents Installing the Stand Installing the Wall Mount KitList of Parts  Owner’s InstructionsPower Remote Control SensorPower Indicator Viewing the Control PanelViewing the Connection Panel Connect to the video and audio output jack on your PC Multi channel digital audioConnect to a Digital Audio Component @ EXT 1, EXTViewing the Remote Control Colour buttons Use these buttons in the Channel list, etcInstalling Batteries in the Remote Control Switching On and OffPlacing Your Television in Standby Mode Mains lead is attached to the rear of your setWith the power on, press the Menu button Using the Tools ButtonViewing the Menus Signals are broadcasted. Please confirm with your local Settings are availablePlug & Play Storing Channels Automatically If you want to reset this featurePress the Enter button to select Country Not available in DTV or external input mode Channel modeStoring Channels Manually Colour System Auto/PAL/SECAM/NTSC4.43Adding channels Adding / Locking ChannelsLocking channels Sorting the Stored Channels Assigning Channels NamesThen Move on the next letter Press the buttonFine Tuning Channel Reception LNA Low Noise AmplifierEasy Setting Changing the Picture StandardConfiguring Detailed Settings on the Picture Adjusting the Custom PictureYou can set detailed picture settings Resetting the Picture Settings to the Factory Defaults Colour Tone Cool2/Cool1/Normal/Warm1/Warm2 Changing the Picture OptionsSize Auto Wide/169/Wide Zoom/Zoom/43/Just Scan Screen Mode 169/ Wide Zoom/Zoom/43 Blue Only Mode Off/OnDigital NR Off/Low/Medium/High/Auto DNIe Off/Demo/OnSound Features Mode Standard/Music/Movie/Speech/CustomEqualizer Balance/100Hz/300Hz/1kHz/3kHz/10kHz SRS TS XT Off/OnSelecting the Sound Mode Connecting Headphones Sold separatelyAuto Volume Off/On TV Speaker Off/OnSetting the Sleep Timer Setting and Displaying the Current TimePress Switching the Television On and Off Automatically Auto Power OffChoosing Your Language Press the Menu button to display the on-screen menuTV power on/off melody sound can be adjusted Melody / Entertainment / Energy SavingMelody Off/Low/Medium/High Melody does not playSelecting the Source Energy Saving Off/Low/Medium/High/AutoEditing the Input Source Names Edit NamePreviewing the DTV Menu System Services or if you move the TV to a new location Updating the Channel List ManuallyEnter You can specify the channel for a fast channel searchEditing Your Favourite Channels Preview Renumber depending on the countryDelete Selecting Channel List Displaying Programme InformationViewing the EPG Electronic Programme Guide Information ThenSetting the Default Guide Using the Scheduled ListYou can preset the default guide style Adjusting the Menu Transparency Viewing All Channels and Favourite ChannelsPress the Enter button again, to select Guide Guide by pressing the or buttonSetting up the Parental Lock Enter your current 4-digit PIN code by using the numericYou can change it later, if necessary Change PINSetting the Subtitle Setting the Subtitle ModeSelecting the Audio Format You can activate and deactivate the subtitlesSelecting the Digital Text Selecting the Audio DescriptionPress the Enter button Press the Exit button to exit Viewing Product Information Selecting the Time Zone Spain onlySelect the local time zone Checking the Signal Information Upgrading the SoftwareViewing Common Interface Selecting the CI Common Interface MenuResetting Selecting the Preferred Language Subtitle, Audio or TeletextPreference This menu consists of 6 sub-menusSetting up Your PC Software Based on Windows XP Display ModesSub Input HDMI/DVI InputSetting up the TV with your PC Preset Press the Source button to select PC modeAuto Adjustment Image ResetWhat is Anynet+? Connecting Anynet+ DevicesTo directly connect to TV To connect to Home TheaterSetting Up Anynet+ Scanning and Switching between Anynet+ Devices Press the Tools button. Then press the Enter button toSetup Select DeviceRecord Menu on DeviceYou can make a recording of a TV programme using a recorder RecordingListening through a Receiver Press The Tools button. Then Press the Enter buttonCheck Points before Requesting Service Symptom SolutionTeletext Feature Status information. Fastext information Adjust to the desired position using the ,,, buttons Entering the menuPress the Menu butt on to display the menu Remembering the PositionMoving to the remembered position Locking direction FigureTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications LE26A457 LE32A457, LE32A455 RISK OF ELECTRIC SHOCK DO NOT OPEN United Kingdom This page is intentionally Left blank