Samsung LE22A457, LE22A455 Plug & Play, Settings are available, If the country is set to Others

Page 11

Plug & Play

When the TV is initially powered on, several basic settings

 

 

 

 

 

Plug & Play

proceed automatically and subsequently. The following

 

 

 

 

settings are available.

 

 

 

 

Any functions related to Digital TV (DVB) will only work in

 

Start Plug & Play.

countries or areas where DVB-T (MPEG2) digital terrestrial

 

 

 

 

signals are broadcasted. Please confirm with your local

 

 

OK

 

 

 

 

 

dealer if you can receive DVB-T signals. Although this TV set

 

 

 

 

follows the DVB-T specification, maintaining compatibility with

 

 

Enter

the future coming DVB-T digital terrestrial broadcasts is not

 

 

 

 

 

 

 

 

guaranteed. Several functions may not be available in some countries.

 

 

 

This product is only applicable to Finnish, Swedish and Danish broadcasts. Broadcasts are not supported in other countries.

1.Press the POWER button on the remote control.

The message "Start Plug & Play." is displayed with "OK" selected.

2.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.

We recommend setting the TV to "Home Use" mode for the best picture in your home environment.

"Store Demo" mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds

4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button.

Please check that the antenna cable is connected correctly.

5.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

6.The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button.

Press the ENTER button at any time to interrupt the memorization process.

The channel search will start and end automatically.

7.The DTV channel scan menu appears.

♦If the country is set to “Others”

“Clock Set” screen appears when searching for the analog channel is finished.

♦If the country is set to “Finland”

Press the ENTER button to select “Start”.

♦If the country is set to “Sweden”, or “Denmark”

Press the ▲ or ▼ button to select “Cable” or “Aerial”. Press the ENTER button. Aerial: scanning for aerial services

Cable: scanning for cable services

For detailed descriptions about DTV channel update, refer to page 28 of this manual.

If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV.

After all the available channels are stored, the “Clock Set” menu appears.

8.Press the ENTER button.

Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the ▲ or ▼ button.

You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on the remote control.

English -

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LCD TV Contact Samsung Worldwide Precautions When Displaying a Still ImageContents List of Parts Installing the StandInstalling the Wall Mount Kit Viewing the Control Panel PowerRemote Control Sensor Power IndicatorConnect to the video and audio output jack on your PC Connector for Service onlyViewing the Connection Panel Connect to a Digital Audio Component Headphones jackTeletext Functions Viewing the Remote ControlMains lead is attached to the rear of your set Installing Batteries in the Remote ControlSwitching On and Off Placing Your Television in Standby ModeViewing the Menus Using the Tools ButtonWith the power on, press the Menu button If the country is set to Finland Settings are availablePlug & Play If the country is set to OthersStoring Channels Automatically If you want to reset this featureSound System BG/DK/I/L Channel modeStoring Channels Manually Colour System Auto/PAL/SECAM/NTSC4.43Locking channels Not available in DTV or external input modeAdding / Locking Channels Adding channelsMove on the next letter Press the button Sorting the Stored ChannelsAssigning Channels Names ThenFine Tuning Channel Reception Changing the Picture Standard Easy SettingResetting the Picture Settings to the Factory Defaults Adjusting the Custom PictureSize Auto Wide/Wide/169/Wide Zoom/Zoom/43/Just Scan Changing the Picture OptionsColour Tone Cool2/Cool1/Normal/Warm1/Warm2 Hdmi Black Level Normal/Low Screen Mode Wide/169/Wide Zoom/Zoom/43Digital NR Off/Low/Medium/High/Auto SRS TS XT Off/On Sound FeaturesMode Standard/Music/Movie/Speech/Custom Equalizer Balance/100Hz/300Hz/1kHz/3kHz/10kHzTV Speaker Off/On Selecting the Sound ModeConnecting Headphones Sold separately Auto Volume Off/OnPress Setting and Displaying the Current TimeSetting the Sleep Timer Press the Menu button to display the on-screen menu Switching the Television On and Off AutomaticallyAuto Power Off Choosing Your LanguageMelody does not play TV power on/off melody sound can be adjustedMelody / Energy Saving Melody Off/Low/Medium/HighEditing the Input Source Names Selecting the SourcePreviewing the DTV Menu System Press the or button to select Digital Channel, then Selecting the CountryPress the or button to select Digital Menu, then press EnterUpdating the Channel List Automatically When the Country was set to FinlandWhen selecting Cable When selecting AerialYou can specify the channel for a fast channel search Updating the Channel List ManuallyEditing Your Favourite Channels Delete Renumber depending on the countryPreview Displaying Programme Information Selecting Channel ListThen Viewing the EPG Electronic Programme Guide InformationYou can preset the default guide style Using the Scheduled ListSetting the Default Guide Viewing All Channels and Favourite Channels Adjusting the Menu TransparencyChange PIN Setting up the Parental LockEnter your current 4-digit PIN code by using the numeric Code you can change it later, if necessaryYou can activate and deactivate the subtitles Setting the SubtitleSetting the Subtitle Mode Selecting the Audio FormatPress the Enter button Press the Exit button to exit Selecting the Audio DescriptionViewing Product Information Upgrading the Software Checking the Signal InformationSelecting the CI Common Interface Menu Viewing Common InterfaceSelecting the Preferred Language Subtitle, Audio or Teletext ResettingThis menu consists of 6 sub-menus PreferenceHDMI/DVI Input Setting up Your PC Software Based on Windows XPDisplay Modes Sub InputImage Reset Setting up the TV with your PCPreset Press the Source button to select PC mode Auto AdjustmentTeletext Feature Locking direction Figure Using the Anti-Theft Kensington Lock depending on the modelWall Securing the TV to the WallTo avoid the TV from falling Untie the string before moving the TVTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications
Top Page Image Contents