Viewing Common Interface
This contains information on CAM inserted in the CI slot and displays it.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER
button.
2.Press the ▲ or ▼ button to select "Setup", then press the ENTER
button.
3.Press the ▲ or ▼ button to select "Common Interface", then press the ENTER
button.
4.Press the ENTER
button to display the information for your application.
5.Press the EXIT button to exit.
➣The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1.Purchase the CI CAM module by visiting your nearest dealer or by phone.
2.Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3.Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4.Check if you can see a picture on a scrambled signal channel.
DTV | Application Info |
| Type : CA |
| Manufacturer : Channel Plus |
| Info : Top Up TV |
| Return |
Selecting the CI (Common Interface) Menu |
|
| |||
This enables the user to select from the |
|
|
| ||
| CI Menu |
| |||
|
|
|
|
| |
1. | Press the MENU button to display the menu. | Main menu |
|
| |
| Press the ▲ or ▼ button to select "Digital Menu", then press the | Module information |
|
| |
| Smart card information |
| |||
| ENTER | button. | Language |
|
|
2. | Press the ▲ or ▼ button to select "Setup", then press the | Software Download |
|
| |
|
|
| |||
3. | ENTER | button. | Press OK to select, or Exit to quit |
| |
Press the ▲ or ▼ button to select "Common Interface", |
| ||||
|
|
| |||
| then press the ENTER button. | Move | Enter | Exit | |
|
|
|
| ||
4.Select to "CI Menu" by pressing the ▲ or ▼ button, and press the ENTER
button.
5.Select the required option by pressing the ▲ or ▼ button, and press the ENTER
button.
6.Press the EXIT button to exit.
➣Select the CI Menu based on the menu PC Card.
English - 39