Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page number directly:
1. Enter the
2.If the selected page is linked with several secondary pages, the secondary
pages are displayed in sequence. To freeze the display on a given page, press the 
( 
). Press the 
( 
) button again to resume.
3. Using the various display options:
To display... | Press the... |
| ||
Both teletext information and the normal broadcast | TTX/MIX ( | ) | ||
Hidden text (answers to quiz games, for example) | INFO ( | ) |
| |
The normal screen | INFO ( | ) |
| |
A secondary page, by entering its | DUAL | ) | ||
The next page | P | ( | ) |
|
The previous page | P | ( | ) |
|
( | ) |
|
| |
Upper half of the screen |
| Once |
|
|
Lower half of the screen |
| Twice |
|
|
Normal screen |
| Three times |
| |
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are
1. Display the teletext contents page by pressing the
TTX/MIX ( 
) button.
2.Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page. Press the Green button to display the next page.
4. Press the TV ( 
) button again to exit from the Text display.
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1. Select the LIST mode using the SOURCE ( 
) button.
The SOURCE ( 
) button is used to switch between the LIST and FLOF modes.
2. Press the coloured button corresponding to the page that will be replaced.
3.Enter the new page number using the numeric buttons.
4. Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time.
5.Press the SLEEP ( 
) button until the corresponding blocks blink.