Samsung LE20S5, LE15S5 manual Setting the PC, Preset Press the Source button to select PC mode

Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or reduce picture
noise. If the noise is not removed by Fine-tuning alone, then adjust the fre-
quency as best as possible (coarse) and Fine-tune again. After the noise has
been reduced, re-adjust the picture so that it is aligned on the center of
screen.
1.	Preset: Press the SOURCE button to select PC mode.
2.	Press the MENU button to display the menu.
	Press the	or	button to select “Setup”,
	then press the ENTER			button.
3.	Press the	or	button to select “PC”, then
	press the ENTER		button.

4.Press the ENTER button to select “Image Lock”.

5.	Press the	or	button to select “Coarse” or “Fine”,
	then press the ENTER			button.
6.	Press the	or	button to adjust the screen quality.
	Press the ENTER		button.

7.Press the EXIT button to exit.

Changing the Image Position (Position):

Adjust the PC’s screen positioning if it does not fit the TV screen.

1.	Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
	instructions number 1 to 3.
2.	Press the or button to select “Position”,
	then press the ENTER	button.

3. Press the	or
Press the	or

Press the ENTER

button to adjusting the Vertical-Position. button to adjust the Horizontal-Position. button.

4.Press the EXIT button to exit.

Initializing the Image Settings (Image Reset):

You can replace all image settings with the factory default values.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2. Press the	or	button to select “Image Reset”,
then press the ENTER			button.

3.Press the EXIT button to exit.

Adjusting the PC Screen Automatically (Auto Adjustment):

Auto adjustment allows the PC screen of set to self-adjust to the

incoming PC video signal. The values of fine, coarse and position are

adjusted automatically.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2. Press the	or	button to select “Auto Adjustment”,
then press the ENTER			button.

3.Press the EXIT button to exit.

English-19