Samsung LE26A346 user manual Installing Batteries in the Remote Control, Switching On and Off

Page 10

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

➣Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

➣Remove the batteries and store them in a cool, dry place if you won’t

be using the remote control for a long time.

➣ If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

➣The standby indicator lights up on your set.

2.Press the button on your set.

➣You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.

➣The channel that you were watching last is reselected automatically.

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control or button on your set.

➣When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWER button on the remote control.

➣The screen is turned off and a red standby indicator appears on your set.

2.To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down (/) button again.

➣Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

English -

Image 10

Contents LCD TV Precautions When Displaying a Still Image Contact Samsung WorldwideContents Installing the Wall Mount Kit Installing the StandList of Parts Remote Control Sensor Speakers PowerPower Indicator Viewing the Control PanelPC in PC / Audio Viewing the Connection PanelConnect to the video and audio output jack on your PC Common Interface Slot Connector for Service onlyMulti channel digital audio Connect to a Digital Audio ComponentEXT Viewing the Remote Control Teletext FunctionsPlacing Your Television in Standby Mode Installing Batteries in the Remote ControlSwitching On and Off Mains lead is attached to the rear of your setWith the power on, press the Menu button Using the Tools ButtonViewing the Menus Signals are broadcasted. Please confirm with your local Settings are availablePlug & Play Storing Channels Automatically If you want to reset this featurePress the Enter button to select Country Storing Channels Manually Not available in DTV or external input modeChannel mode Colour System Auto/PAL/SECAM/NTSC4.43Adding channels Adding / Locking ChannelsLocking channels Then Sorting the Stored ChannelsAssigning Channels Names Move on the next letter Press the buttonFine Tuning Channel Reception LNA Low Noise AmplifierEasy Setting Changing the Picture StandardAdjusting the Custom Picture Resetting the Picture Settings to the Factory DefaultsColour Tone Cool2/Cool1/Normal/Warm1/Warm2 Changing the Picture OptionsSize Auto Wide/169/Wide Zoom/Zoom/43/Just Scan Digital NR Off/Low/Medium/High/Auto Screen Mode 169/ Wide Zoom/Zoom/43Hdmi Black Level Normal/Low Equalizer Balance/100Hz/300Hz/1kHz/3kHz/10kHz Sound FeaturesMode Standard/Music/Movie/Speech/Custom SRS TS XT Off/OnAuto Volume Off/On Selecting the Sound ModeTV Speaker Off/On Setting the Sleep Timer Setting and Displaying the Current TimePress Choosing Your Language Switching the Television On and Off AutomaticallyAuto Power Off Press the Menu button to display the on-screen menuMelody Off/Low/Medium/High TV power on/off melody sound can be adjustedMelody / Energy Saving Melody does not playSelecting the Source Editing the Input Source Names Edit NamePreviewing the DTV Menu System Enter Services or if you move the TV to a new locationUpdating the Channel List Manually You can specify the channel for a fast channel searchEditing Your Favourite Channels DescriptionPreview Renumber depending on the countryDelete Selecting Channel List Displaying Programme InformationViewing the EPG Electronic Programme Guide Information ThenSetting the Default Guide Using the Scheduled ListYou can preset the default guide style Adjusting the Menu Transparency Viewing All Channels and Favourite ChannelsYou can change it later, if necessary Setting up the Parental LockEnter your current 4-digit PIN code by using the numeric Change PINSelecting the Audio Format Setting the SubtitleSetting the Subtitle Mode You can activate and deactivate the subtitlesSelecting the Digital Text UK only Selecting the Audio DescriptionPress the Enter button Press the Exit button to exit Viewing Product Information Selecting the Time Zone Spain onlySelect the local time zone Checking the Signal Information Upgrading the SoftwareViewing Common Interface Selecting the CI Common Interface MenuResetting Selecting the Preferred Language Subtitle, Audio or TeletextPreference This menu consists of 6 sub-menusSub Input Setting up Your PC Software Based on Windows XPDisplay Modes HDMI/DVI InputAuto Adjustment Setting up the TV with your PCPreset Press the Source button to select PC mode Image ResetTeletext Feature Using the Anti-Theft Kensington Lock depending on the model Locking direction FigureDepending on the type of wall Securing the TV to the WallTo avoid the TV from falling WallTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications